Countertop reverse osmosis dispenser on a coastal Queensland kitchen bench with a glass of cold water and a mug of hot tea, comparing the Waterdrop C1S and C1H

Waterdrop C1S vs C1H (2026): Which Countertop RO Should You Buy in Australia?

19 min read

Drafted with AI assistance and checked against published specifications and certifications. First-hand measurements appear only where stated. How we make content

How this assessment was made. I own and tested the Waterdrop C1S: I bought it on Amazon AU on 4 November 2026 and measured it in my Palm Beach, QLD kitchen (full results in my Waterdrop C1S review). I have not tested the C1H. Its details come from Waterdrop’s Australian page, its user manual and the Amazon AU listing, all checked on 7 Nov 2026, and I say where a figure is Waterdrop’s rather than mine. Drafted with AI assistance and checked against the sources: how we make content.

Affiliate disclosure: Amazon may pay Clean and Native a commission on sales through our links, at no extra cost to you. As an Amazon Associate, Clean and Native earns from qualifying purchases. Waterdrop did not supply either unit.

The Waterdrop C1S and C1H are the same countertop reverse osmosis machine with one difference: the C1H heats water instantly, with five settings up to about 95 °C, and has a child lock. Both use the same C1RF filter, the same 3:1 pure-to-drain ratio and the same 29.7 x 21.1 cm footprint. On 7 Nov 2026 the C1H was $374.14 online and the C1S was $379.22, so if you would use hot water, the C1H is the better buy at that price. If you only want cold drinking water, buy the C1S.

I spent my working life as a Royal Australian Navy Clearance Diver, and the habit stuck: compare equipment on what it measurably does, not on the box. I have the C1S on my bench, so this comparison starts from real numbers: it took my Gold Coast tap water from 69 ppm to 7 ppm TDS.

Quick Verdict | Clean and Native

Same filter, same filtration, same size. Pay for the C1H only if you will use the hot water, and check both prices on the day: they move often.

Model Best for Amazon AU
Waterdrop C1HTea and coffee drinkers; hot and room-temperature waterCurrently unavailable on Amazon AUas of 19 Nov 2026, 5:43 pm AEST Details
Waterdrop C1SCold drinking water only; the unit I tested$379.22at Amazon AU · as of 19 Nov 2026, 11:43 pm AEST Details
C1RF filter (fits both)12 months or 1,100 US gal$99.99at Amazon AU · as of 19 Nov 2026, 8:43 pm AEST Details
Check the C1H price on Amazon AU → Check the C1S price on Amazon AU →Amazon AU price: $379.22 · as of 19 Nov 2026, 11:43 pm AEST Details

What is the same

Underneath, these are one design. Waterdrop lists the same 6-stage filtration with an RO membrane, the same C1RF twist-lock filter rated for 12 months or 1,100 US gallons, the same 75 gallons-per-day output, the same 3:1 pure-to-drain ratio, the same 29.7 x 21.1 x 34.8 cm body and the same 6.35 kg weight.

You use them the same way: fill a feed tank of about 3.2 L at the tap, the pump pushes it through the filter into a detachable pure-water pitcher, and you dispense from a touch screen that shows TDS and filter life. Neither needs plumbing. On both, Waterdrop says not to use source water above 500 ppm TDS.

Filling the Waterdrop C1S feed water tank from the kitchen mixer tap in a Palm Beach QLD kitchenWaterdrop C1S display reading TDS 003 and 8 oz while a handheld TDS meter tests the dispensed glass
My C1S: filling the feed tank at the tap, and the display reading 003 TDS while my handheld meter checks the glass. The C1H uses the same tank and filter. Photos: Jayce Love.

What is different

Feature Waterdrop C1S Waterdrop C1H
Water temperatureRoom temperature onlyRoom temperature plus 4 hot settings: about 45, 65, 85 and 95 °C (5 settings in total)
HeatingNoneInstant, Waterdrop quotes about 3 seconds
Child lockNot listedYes
Amazon AU price$379.22at Amazon AU · as of 19 Nov 2026, 11:43 pm AEST DetailsCurrently unavailable on Amazon AUas of 19 Nov 2026, 5:43 pm AEST Details
Waterdrop AU store$499 listListed as discontinued

The C1H’s temperatures come from its manual, which lists 113, 149, 185 and 203 °F plus room temperature; I have converted them. Waterdrop says it heats on demand in about 3 seconds.

My C1S results

Test My result
Gold Coast tap water69 ppm TDS (handheld meter)
C1S output, same meter7 ppm, a 90% drop
C1S built-in display3 ppm
Setup, including the automatic flushAbout 20 minutes, no tools
8 oz preset into a glass20.50 seconds
Noise and tasteVery little noise; clean taste from the first glass

Because both machines use the same C1RF filter and membrane, I would expect the C1H’s cold output to land in the same range on the same water, but that is an expectation, not a measurement. My meter is a consumer TDS meter and is not calibrated. Photos, the full setup and the running costs are in my Waterdrop C1S review.

Handheld TDS and EC meter reading 7 ppm at 26.2 C in a glass of water from the Waterdrop C1SPhone stopwatch showing 20.50 seconds, the time the Waterdrop C1S took to dispense its 8 oz setting into a glass
Left: 7 ppm in a glass from my C1S. Right: 20.50 s for the 8 oz preset. Photos: Jayce Love.

C1S or C1H chooser

Answer three questions. Put in the C1H price you see today, because the gap between these two moves week to week.

C1S or C1H | prices checked 7 Nov 2026Which Waterdrop fits your kitchen?
C1S price $379.22at Amazon AU · as of 19 Nov 2026, 11:43 pm AEST Details when checked. Both use the same C1RF filter. Enter the C1H price you see today; it was $509.15 before the current discount.

Waterdrop C1S vs C1H: side-by-side specifications

Spec Waterdrop C1S Waterdrop C1H
Filtration6-stage, C1RF with RO membrane6-stage, C1RF with RO membrane
Filter life12 months or 1,100 US gal12 months or 1,100 US gal
Rated output / ratio75 GPD / 3:175 GPD / 3:1
Feed tank / pure pitcher3.2 L / about 1 L (4 cups)110 oz (about 3.2 L) / about 1 L (4 cups)
Hot waterNo5 settings to about 95 °C
Volume presets4, 8, 16, 20 oz, MAX5 presets
DisplayTDS, filter life, flush progressTDS, temperature, filter life
Child lockNot listedYes
CertificationNSF/ANSI 372 (lead-free materials)NSF/ANSI 372 (lead-free materials)
Size / weight29.7 x 21.1 x 34.8 cm / 6.35 kg29.7 x 21.1 x 34.8 cm / 6.35 kg
Warranty1 year1 year
Tested by Clean and NativeYes, 69 to 7 ppmNo

I could not confirm an NSF/ANSI 58 certification, the performance standard for reverse osmosis, for either model. Waterdrop’s Australian C1H page claims NSF/ANSI 58 testing by IAPMO R&T, but its UK page, the C1S page and the Amazon AU listings state NSF/ANSI 372 (lead-free materials) only, so I have used 372 until a certificate listing confirms 58. The contaminant-reduction claims come from Waterdrop’s third-party lab testing (the Amazon listings name SGS).

What 95 °C hot water is good for

Water at 85 to 95 °C covers plunger coffee, instant noodles and most tea, though black-tea purists will still want a kettle. Green tea is commonly brewed at 70 to 80 °C; the C1H has no setting in that band, so 65 or 85 °C is the closest. If your household drinks several hot drinks a day, it means one less appliance boiling a full kettle each time.

Not boiling. 95 °C is not 100 °C. Anything that calls for boiled water still needs a kettle; for example, Australian infant-feeding guidance says to boil fresh tap water and let it cool before making formula. The C1H manual labels its 45 °C setting for baby formula; Australian guidance is still to boil fresh water and let it cool, so do not use that setting as a substitute. Use the child lock if small children can reach the bench.

Availability and filters

Waterdrop’s Australian store listed the C1H as discontinued when I checked, while WaterdropDirect AU still had it in stock on Amazon AU (Currently unavailable on Amazon AUas of 19 Nov 2026, 5:43 pm AEST Details). That may be why it is discounted. If you buy one, filters are not a worry: the C1RF fits both the C1S and the C1H, and it was $99.99 online.

Waterdrop C1H instant hot countertop reverse osmosis systemCountertop RO + hot
Hot and room-temperature
Waterdrop C1H Instant Hot Countertop RO

C1RF filter | 5 temperature settings to about 95 °C | Child lock | 3:1 | NSF/ANSI 372 | Not tested by me

Check the C1H price on Amazon AU →
Waterdrop C1S countertop reverse osmosis systemCountertop RO
Tested: cold water only
Waterdrop C1S Countertop RO

C1RF filter | Room temperature | 69 to 7 ppm in my test | 3:1 | NSF/ANSI 372

Check the C1S price on Amazon AU →Amazon AU price: $379.22 · as of 19 Nov 2026, 11:43 pm AEST Details
Waterdrop C1RF replacement filter for C1S and C1HAnnual filter12-month life
Fits both
Waterdrop C1RF Replacement Filter

Fits C1S and C1H | 12 months or 1,100 US gal | Twist-lock

Check the C1RF price on Amazon AU →Amazon AU price: $99.99 · as of 19 Nov 2026, 8:43 pm AEST Details
Free audit

Check all seven rooms, not just this one

38 checks, 29 free, ranked by impact. Sent as a 32-page PDF.

We'll email you the audit and a short series of practical guides. Unsubscribe in one click, any time. Privacy.

Sent. Taking you to your download...

Setting up either one

Setup is the same process on both, because the filter, tank and flush routine are the same. On my C1S it took about 20 minutes from opening the box to clean water, and most of that was the machine flushing itself. The steps:

  1. Peel the black film off the screen. Both Amazon listings warn about this; the touch keys will not respond properly with it on.
  2. Fit the C1RF filter into the top of the unit and twist it clockwise until it locks. No tools.
  3. Fill the feed tank at the tap and slide it back in.
  4. Plug in and let it flush. The display counts up in percent. When it prompts you (Waterdrop says at about 50%), tip out what is left in the feed tank, refill with fresh tap water and let it finish to 100%. Do not drink the flush water.
  5. Optional: Waterdrop’s note card suggests flushing one or two more tanks to improve taste.

On the C1H there is one more step: set the child lock if children can reach the bench, and learn which key unlocks hot water before you need it.

Three-year cost of each

Because both use the same C1RF filter, the running cost is identical and the purchase price decides it. Over three years, with the filter changed every 12 months as Waterdrop rates it, at the prices I checked:

Cost item Waterdrop C1S Waterdrop C1H
Unit (7 Nov 2026)$379.22$374.14
Two replacement C1RF filters (years 2 and 3)$199.98$199.98
Three-year total$579.20$574.12

Electricity is left out: the C1S manual lists 50 W, and Waterdrop does not publish the C1H’s heating power on the pages I checked, so I have not estimated it. If you drink more than about 4,164 L a year (roughly 11 L a day), the filter would need changing more often than once a year on either model.

Day-to-day differences

Cold water works the same on both: tap a volume, press dispense, and the pump pours from the pitcher. My C1S filled its 8 oz preset in 20.50 seconds. The presets differ slightly: the C1S label lists 4, 8, 16 and 20 oz and MAX, while the C1H manual gives examples including 8, 16, 20 and 40 oz and MAX, which suits filling a teapot or a pot of water for cooking.

The C1H adds a temperature choice before you dispense, and its screen shows temperature as well as TDS and filter life. On my C1S, the OUT icon tells you to empty and refill the feed tank, and the concentrate appears to go back into that tank rather than to a drain, so you tip out the leftover at each refill. The C1H uses the same body and feed tank, so expect the same routine: carrying a 3.2 L tank to the tap.

Waterdrop C1S feed water tank removed, showing the line marked Empty the tank when the water is below the lineWaterdrop C1S touch panel protective film labelling the TDS, flush, filter life and water volume indicators
My C1S feed tank with its empty line, and the touch panel guide. The C1H uses the same body and feed tank. Photos: Jayce Love.

Water quality: what you can expect from both

Filtration is the same membrane and the same cartridge, so the cold water should be equivalent. On my Gold Coast tap water the C1S dropped TDS from 69 to 7 ppm on my meter. Waterdrop’s own claims, from third-party lab testing, cover lead, TDS, PFOA, PFOS, fluoride, chlorine, copper and arsenic; a TDS meter cannot check those individually, so treat them as Waterdrop’s figures, not mine.

Two limits apply to both. Waterdrop says not to use source water above 500 ppm TDS, and the manual says not to use water that is microbiologically unsafe or of unknown quality. Treated mains water in Australian cities is usually well under that TDS limit; untreated rainwater tank or bore water is not what these units are designed for.

If neither is right for you

If you want Look at Why
Hot and chilled waterWaterdrop A2, $719.10 onlineAdds chilled water; larger and pricier; not tested by me
No tank to refillAn under-sink RO such as the EcoHeroPlumbed in; mine reads 3 ppm on the same meter; needs installation
Cheapest no-plumbing filtrationA certified jug or benchtop filterMuch cheaper, but not RO; see the countertop guide

More detail in my EcoHero review and affordable reverse osmosis filters, or compare every type, from jugs to RO, in the best water filters in Australia.

Who should buy which

✓ Buy the C1H if

  • You drink tea or coffee most days
  • It is the same price or less than the C1S, as it was when I checked
  • You want room-temperature and hot water from one filter
  • You are happy to use a child lock if kids are around

× Buy the C1S if

  • You only want cold drinking water
  • The C1H is back near its $509 price
  • You want the simpler machine with no heater
  • You want the unit I have tested and can vouch for

Verdict

These are the same filter in the same body, so the decision is simply whether hot water is worth it to you at today’s prices. When I checked, the C1H was $5 cheaper, which makes it the better buy for anyone who drinks hot drinks. If you want cold filtered water and nothing else, the C1S is the one I have on my own bench and the one I can back with my own numbers.

Still deciding between countertop RO and other options? See the best countertop water filters, Waterdrop C1S vs AquaTru and the best reverse osmosis systems in Australia.

Waterdrop C1S vs C1H | prices checked 7 Nov 2026

Prices on these two change often. Both checked on Amazon AU on 7 Nov 2026.

Frequently asked questions

What is the difference between the Waterdrop C1S and C1H?

The C1H adds instant hot water, with five settings up to about 95 C, and a child lock. Otherwise they share the C1RF filter, 6-stage filtration, 3:1 ratio, 75 GPD rating and the same 29.7 x 21.1 x 34.8 cm body.

Is the Waterdrop C1H worth it over the C1S?

If you drink hot drinks and the price gap is small, yes. On 7 Nov 2026 the C1H was $374.14 and the C1S $379.22 online, so the C1H was the better buy for tea and coffee drinkers.

Do the C1S and C1H use the same filter?

Yes. Both use the Waterdrop C1RF, rated for 12 months or 1,100 US gallons. It was $99.99 online when checked.

Does the Waterdrop C1H boil water?

No. Its hottest setting is about 95 C (203 F in the manual). For anything that needs boiled water, such as making infant formula, use a kettle.

Is the Waterdrop C1H discontinued in Australia?

Waterdrop’s Australian store listed it as discontinued when checked on 7 Nov 2026, but it was still in stock on Amazon AU from WaterdropDirect AU.

How much does it cost to run a Waterdrop C1S or C1H?

One C1RF filter a year, $99.99at Amazon AU · as of 19 Nov 2026, 8:43 pm AEST Details when checked. Over three years, including the unit, that was $579.20 for the C1S and $574.12 for the C1H at 7 Nov 2026 prices, before electricity.

Can I use rainwater or bore water in the C1S or C1H?

Not untreated. Waterdrop says to use only microbiologically safe water under 500 ppm TDS. Treated mains water is what both are designed for.

How well does the Waterdrop C1S filter?

In my kitchen it took Gold Coast tap water from 69 ppm to 7 ppm TDS on a handheld meter, a 90% drop. Its own display read 3 ppm.

Jayce Love, former Royal Australian Navy Clearance Diver and Clean and Native founder
Written by Jayce Love

Former Royal Australian Navy Clearance Diver and TAG-E counter-terrorism operator. Founded Clean and Native to apply the same rigorous thinking to the home environment.

Full biography →
Free · 32-page PDF

The 7-Room Home Audit

Your tap water is one room. The audit covers all seven: 38 checks across water, air and EMF, 29 of them free, ranked by impact against Australian guidelines.

  • Morning tap flush: the free lead fix most homes skip
  • How to read your utility's water quality report
  • Renting or owning: the two reverse osmosis filters I use at home

We'll email you the audit and a short series of practical guides. Unsubscribe in one click, any time. Privacy.

Sent. Taking you to your download...

Similar Posts