Reviewed from Palm Beach QLD · TDS meter · ADWG & NHMRC data · Independent: no sponsored placements
Glass of water with a TDS meter on a kitchen bench in a Palm Beach QLD home WATER FILTRATION

WATER FILTRATION

What’s Actually in Australian Tap Water?

J
Jayce Love · Founder, former RAN Clearance Diver
PUBLISHED 21 MAR 2026 · UPDATED 26 OCT 2026 · 12 MIN READ

Australian tap water meets the national safety guidelines. That does not mean there is nothing in it. Here’s what’s worth filtering, and how to choose the right system for your home.

⚓

Independently assessed. Jayce Love tests the products he owns in his own home, and assesses everything else on manufacturer specification and independent certification: no gifted units, no brand payments. See our testing process →

Disclosure: This page contains affiliate links. If you buy through our links, we may earn a small commission at no extra cost to you. See our comparison methodology →

The short answer

What is in Australian tap water

Australian tap water is safe to drink under the national guidelines. What is in it, by design: a disinfectant (free chlorine in most of the country, chloramine in most of Sydney and Brisbane), fluoride in every capital-city supply (utilities target 0.7 to 1.0 mg/L), and dissolved minerals. What can turn up: PFAS near some airports, defence and industrial sites, and lead from household plumbing and brass fittings. A filter is a choice about what you want less of, not a fix for unsafe water.

I spent my Navy career as a Clearance Diver, in water where you assess the environment before you trust it and you choose kit for the threat in front of you, not the one on the brochure. Tap water deserves the same treatment. Your utility publishes exactly what it adds and what it measures. Start there, then buy the filter that matches.

Your water, from the utility’s own reports

What is in your tap water? Pick your area.

Disinfectant and fluoride, sourced from each water utility, council or state health department. Hobart is not listed because I could not confirm its disinfectant from a primary source.

Choose an area above to see its disinfectant, its fluoride status and what I would filter for. The same data is in the table below.

What is actually in the water

These are the things worth knowing about, with the Australian Drinking Water Guidelines (ADWG) value for each. Every figure here comes from the NHMRC guidelines or your utility, not from a filter maker.

What Why it is there ADWG value Worth filtering?
ChlorineDisinfection, most supplies5 mg/L health; 0.6 mg/L taste and odourFor taste and smell
ChloramineLonger-lasting disinfection, most of Sydney and Brisbane3 mg/L (monochloramine)For taste; needs RO or chloramine-rated carbon
FluorideAdded for dental health in every capital city1.5 mg/L health; target 0.7 to 1.0 mg/LYour choice; RO if you want it out
PFASContamination near some airports, defence and industrial sitesPFOS 0.008, PFHxS 0.03, PFOA 0.2 µg/L (June 2025)Yes if your catchment is affected
LeadHousehold plumbing, brass fittings and taps0.005 mg/L (lowered June 2025)Yes in older homes; flush taps that sit
NitrateFarming run-off, mainly bores and rural supplies50 mg/L (protects bottle-fed infants)Bore and tank users: test it
HardnessCalcium and magnesium from the source200 mg/L (scale, not health)A softener, not a filter
Dissolved solids (TDS)Everything dissolved, mostly minerals600 mg/L (taste)Only if taste bothers you

Two points most guides get wrong. First, the ADWG was updated in June 2025 with lower values for PFAS and lead, and the NHMRC says most water supplies are already below the new PFAS values. Second, lead at the tap usually does not come from the mains. The NHMRC says it most commonly leaches from household plumbing and products containing lead, including brass fittings, solder and taps. That makes it a building problem, which is why a point-of-use filter or simply running the tap first in the morning is the fix.

My own water: what I measured

My supply is the Gold Coast, from my kitchen in Palm Beach. Seqwater's September 2026 data shows it is disinfected with free chlorine at about 1.5 mg/L and fluoridated at a 12-month average of 0.73 mg/L. My tap measures 69 ppm on a TDS meter. After the Pure Water Systems EcoHero 5-stage reverse osmosis system under my sink, it reads 3 ppm.

TDS meter reading 69 ppm in a glass of Palm Beach QLD mains tap waterTDS meter reading 3 ppm in a glass of reverse osmosis water from the EcoHero system
Palm Beach QLD (Gold Coast supply). Left: kitchen tap, 69 ppm TDS. Right: the same water after the EcoHero 5-stage RO, 3 ppm. A TDS meter counts dissolved ions in total; it does not identify PFAS, lead or fluoride.

Be clear on what that proves. A TDS meter counts dissolved ions in total, mostly harmless minerals. A big drop shows an RO membrane is working. It does not identify PFAS, lead or fluoride, and it does not measure chlorine at all. For those, rely on a product's certification or a lab test. Any review that uses a TDS reading as proof a jug removes chlorine is measuring the wrong thing.

What each filter type actually removes

Every filter on the market is a variation on a few technologies. This is what each one does, based on certifications, the American Dental Association on fluoride, and the largest independent study of home PFAS filters (Duke University and NC State, 76 point-of-use filters).

Filter type Chlorine Chloramine Fluoride PFAS Lead TDS Typical cost
Carbon jugYesLimitedNoVariableIf certifiedNo~$50 to $150
Under-sink carbon (2-stage)YesIf certifiedNoNear completeIf certifiedNo~$100 to $250 + plumber
Countertop ROYesYes (carbon + RO)YesNear completeIf certifiedYes~$190 to $800
Under-sink ROYesYes (carbon + RO)YesNear completeIf certifiedYes~$700 to $1,000 + plumber
Whole house carbonYesIf sized for itNoCan be worseNot its jobNo~$400 to $2,500 + plumber
Shower filterYesNoNoNoNoNo~$35 to $70

Notes on that table. Fluoride: the ADA says almost all reverse osmosis systems remove most fluoride and most carbon filters do not; some activated alumina and bone char filters also reduce it. PFAS: the Duke study found near complete removal by every under-sink two-stage and RO filter tested, variable removal by pitchers and other carbon filters (around 60 to 70% for long-chain and 40% for short-chain PFAS), and whole house systems that in some cases increased PFAS levels. Lead: only trust a lead claim backed by NSF/ANSI 53 or 58 certification. Costs are typical Amazon AU and supplier prices on 19 October 2026.

Key takeaway: Carbon is the right tool for chlorine taste. Reverse osmosis is the only household option that covers fluoride, PFAS, lead and dissolved solids together. If cost is the sticking point, see the affordable reverse osmosis systems worth buying. Everything else is a trade-off between those two.
How it works · Animated diagram

How a reverse osmosis filter works, stage by stage

Watch tap water move through the sediment and carbon pre-filters, the membrane, the storage tank and the post-filter, and see where the rejected salts go to the drain. It shows why RO handles fluoride and dissolved solids when carbon alone cannot.

See the animated diagram →

The filters I would buy, by goal

For all seven picks ranked side by side, with running costs and a filter finder, see the best water filters in Australia.

Everything, including fluoride: under-sink reverse osmosis

Pure Water Systems EcoHero 5-stage reverse osmosis system installed under the kitchen sink in Jayce Love's Palm Beach QLD homeMeasured at home69 → 3ppm TDS, Palm Beach tap
What I use | Measured at home
Pure Water Systems EcoHero 5-Stage RO (Under Sink)

5 stages incl. deioniser | EcoHero-50 membrane | AS/NZS 3497 (WaterMark standard) listed | Faucet sold separately | $949 system only (26 Oct 2026)

Black Friday alternative: Waterdrop X8 on Amazon AU →Amazon AU price: $611.29 · as of 19 Nov 2026, 11:43 pm AEST Details

This is the system under my own sink, and the source of the 69 to 3 ppm reading above. It is listed to AS/NZS 3497, the Australian standard plumbed-in water treatment units are certified against, so a licensed plumber can install it. If you own your home and want one system that handles fluoride, PFAS, lead and taste, this is it. See the under-sink filter guide for the alternatives.

Renters and no plumbing: countertop reverse osmosis

Waterdrop C1S countertop reverse osmosis system with detachable pure water pitcherCountertop RO3:1pure to drain (Waterdrop)
Best for renters | No plumbing
Waterdrop C1S Countertop RO (WD-C1S)

No plumbing | 6-stage incl. 0.0001 µm RO | Live TDS display | Room temperature only | NSF/ANSI 372

Check the Waterdrop C1S Price on Amazon →Amazon AU price: $379.22 · as of 19 Nov 2026, 11:43 pm AEST Details

The Waterdrop C1S sits on the bench and fills from a tank, so there is nothing to plumb and nothing to lose on your bond. It is the benchtop option that reduces fluoride and dissolved solids. The trade-off is bench space and refilling the tank. See the countertop guide.

Under-sink RO without a tank

Waterdrop X8 tankless under-sink reverse osmosis systemUnder-sink RO2:1pure to drain (Waterdrop)
Tankless | High flow
Waterdrop X8 Tankless Under-Sink RO (WD-X8)

800 GPD tankless | 0.0001 µm RO | IAPMO certified to NSF/ANSI 58 (Waterdrop) | Needs a power point

Check the Waterdrop X8 Price on Amazon →Amazon AU price: $611.29 · as of 19 Nov 2026, 11:43 pm AEST Details

If you want RO under the sink without a storage tank, the Waterdrop X8 is IAPMO certified to NSF/ANSI 58, according to Waterdrop, and quotes 2 litres of pure water for every litre to drain. It needs a power point under the sink and a licensed plumber to connect it.

On a budget: a certified jug

Culligan with ZeroWater Technology 7-cup water filter pitcher with TDS meterCertified jugFluorideIAPMO NSF/ANSI 53
Budget | Certified jug
Culligan with ZeroWater Technology 7-Cup Pitcher

IAPMO certified to NSF/ANSI 53: fluoride, lead, total PFAS and more | Filter rated 20 gal (~76 L) | TDS meter included | Imported by Amazon US

Check the ZeroWater Pitcher Price on Amazon →Amazon AU price: $54.24 · as of 19 Nov 2026, 8:43 pm AEST Details

If you want to start for about $50, this is the one jug I found independently certified to NSF/ANSI 53 for fluoride, lead and total PFAS. Its filter is rated at only about 76 litres, so running costs add up if it is your main supply. For the full PFAS picture, see the PFAS filter guide.

Chlorine, chloramine and fluoride by area

The full list behind the checker above. Most of Australia uses free chlorine. Chloramine is concentrated in most of Sydney, Brisbane and the central South East Queensland grid, regional South Australia and the WA Goldfields.

Area Disinfectant Fluoride
Sydney (most suburbs)ChloramineYes. NSW dosing target 1 mg/L
Wollongong and IllawarraChlorineYes, per Sydney Water's system-wide compliance; the Illawarra plant is not separately reported
BrisbaneChloramineYes. Dosed at 0.8 mg/L; 12-month average 0.69 mg/L (Sept 2026)
Gold CoastChlorineYes. 12-month average 0.73 mg/L (Sept 2026)
Sunshine CoastChlorine or chloramineYes. 12-month average 0.76 mg/L (Sept 2026)
LoganChlorine or chloramineYes, dosed by Seqwater. 12-month average 0.71 mg/L (Sept 2026)
MelbourneChlorineYes. Optimum 0.9 mg/L, dosed by Melbourne Water
GeelongChlorine or chloramineYes, since 2009. Optimum 0.9 mg/L
CanberraChlorineYes. About 0.7 mg/L at both plants (2024 to 25)
Adelaide metroChlorineYes. Added to metropolitan supplies (level not published)
Regional SAChloramineAdded to major country supplies; smaller towns vary
Perth metroChlorineYes. Optimum 0.9 mg/L
Kalgoorlie and the WheatbeltChloramineNot confirmed from a primary source
DarwinChlorineYes. Dosed at under 1 mg/L
Newcastle and HunterChlorineYes. Typically 1 mg/L
Central Coast NSWChlorineYes. 12-month average 0.77 mg/L (2025)
TownsvilleChlorineYes. Currently dosed lower, at about 0.5 mg/L, at the Douglas plant
CairnsChlorineNo. Not fluoridated (Queensland Health)
ToowoombaChlorineYes on the Mt Kynoch supply (target 0.8 mg/L); not Cambooya, Greenmount, Clifton or Nobby

Fluoride levels at the tap vary more than the targets suggest: Seqwater notes that not all South East Queensland sources are fluoridated, and its September 2026 monthly averages for Brisbane, Logan and the Gold Coast were 0.46 to 0.52 mg/L, below the 0.8 mg/L dosing level. Cairns is not fluoridated at all. If your area is mixed or missing, your utility's latest quarterly or annual drinking water quality report lists the disinfectant and the fluoride level. Most utilities publish one each year.

How to read your utility's water report in five minutes

This is the step most people skip, and it is free. 1. Find it. Search your utility's name and "drinking water quality report". Sydney Water, Seqwater and others publish by zone or delivery system. 2. Find the disinfectant. Look for free chlorine, total chlorine or monochloramine. If monochloramine is listed with a real number and free chlorine is near zero, you are on chloramine. 3. Find fluoride. A level around 0.7 to 1.0 mg/L means it is added. 4. Check PFAS. Some utilities publish PFAS results; compare them with the June 2025 ADWG values in the table above. 5. Check hardness and TDS if scale or taste is your complaint. Then go back to the filter table and pick the technology that matches what you found.

Do you need a plumber?

If it connects to the mains, yes. Plumbed-in drinking water treatment units are on the WaterMark Schedule of Products under AS 3497, and Victoria's Building and Plumbing Commission says they must be installed by a licensed or registered plumber, who is prohibited from installing a product that lacks WaterMark when it is required. In Queensland, replacing a domestic filter cartridge is unregulated work; installing the unit is not. Countertop units and jugs are not connected to the mains, so they need no plumber.

Does reverse osmosis waste water?

Yes, and this is a fair objection. The US EPA says a typical point-of-use RO system sends five litres or more to the drain for every litre it produces, and its WaterSense label requires 2.3 or less. Newer units do better: the Waterdrop X8 quotes 2:1 and the C1S 3:1 (pure to drain). If you are on tank water or watching your bill, buy a modern high-efficiency unit and use the drain water on the garden.

Frequently asked questions

What is in Australian tap water?

A disinfectant (free chlorine in most of Australia, chloramine in most of Sydney and Brisbane), fluoride in every capital-city supply at about 0.7 to 1.0 mg/L, and dissolved minerals. PFAS has been found near some airports, defence and industrial sites, and lead can come from household plumbing and brass fittings.

Is Australian tap water safe to drink?

Yes. Town water is regulated against the Australian Drinking Water Guidelines, updated in June 2025 with lower values for PFAS and lead. A filter reduces things you would rather have less of; it is not a fix for unsafe water.

Which Australian cities use chloramine?

Most of Sydney and Brisbane, plus regional South Australia, the southern Adelaide Hills and the WA Goldfields. Melbourne, Perth, Canberra, Adelaide metro, Darwin, the Gold Coast and Newcastle use free chlorine.

What is the best water filter for Australian tap water?

For everything including fluoride, an under-sink reverse osmosis system such as the Pure Water Systems EcoHero, which cut my tap water from 69 to 3 ppm TDS. Renters can use a countertop RO such as the Waterdrop C1S. On a budget, a jug certified to NSF/ANSI 53.

Do water filters remove fluoride?

Reverse osmosis removes most fluoride, according to the American Dental Association, and some activated alumina and bone char filters reduce it. Most carbon filters, including standard jugs, do not.

Do water filters remove PFAS?

Some do. A Duke University and NC State study found near complete PFAS removal by every under-sink two-stage and RO filter tested, variable removal by pitcher filters, and whole house systems that sometimes increased PFAS. Look for NSF/ANSI 53 or 58 certification with a PFAS claim.

Can a TDS meter tell me if my water is safe?

No. A TDS meter counts total dissolved ions, mostly harmless minerals. It shows whether an RO membrane is working, but it cannot detect PFAS, lead, fluoride or chlorine.

Where does lead in tap water come from?

The NHMRC says lead most commonly leaches from household plumbing and products containing lead, such as brass fittings, solder and taps, rather than the mains. Running the tap before drinking and a certified point-of-use filter both help.

Sources and references (48) ▾
  1. NHMRC ADWG: Summary of guideline values (chlorine, monochloramine, hardness)
  2. NHMRC: PFAS guideline values (updated 25 June 2025)
  3. NHMRC ADWG: Fluoride fact sheet
  4. NHMRC ADWG: Lead fact sheet (0.005 mg/L, 2025)
  5. NHMRC ADWG: Total dissolved solids
  6. Sydney Water: Potts Hill quarterly water quality report (monochloramine, fluoride)
  7. Seqwater: Brisbane zone water quality report, September 2026
  8. Seqwater: Gold Coast zone water quality report, September 2026
  9. Yarra Valley Water: how Melbourne's water is disinfected
  10. SA Water: disinfecting your drinking water (chloramine)
  11. Water Corporation: Drinking Water Quality Annual Report 2023-24
  12. Queensland Health: water fluoridation
  13. American Dental Association: Fluoridation Facts (home treatment and fluoride)
  14. Herkert et al. 2020, Environ. Sci. Technol. Lett.: point-of-use filters and PFAS
  15. US EPA: reducing PFAS in drinking water with treatment technologies (fact sheet, 2024)
  16. NSF: PFAS and the NSF/ANSI 53 and 58 total-PFAS claims
  17. US EPA WaterSense: point-of-use reverse osmosis systems
  18. ABCB: WaterMark Schedule of Products (AS 3497 water treatment units)
  19. Victorian Building and Plumbing Commission: WaterMark and licensed installation
  20. Southern Downs Regional Council (QLD): unregulated plumbing work, filter cartridge replacement
  21. ABCB product register: Pure Water Systems 5 Stage Undersink RO (AS/NZS 3497)
  22. Waterdrop: X8 reverse osmosis system specifications
  23. Waterdrop: C1S countertop RO specifications
  24. Cooperative Extension: what a TDS test does and does not tell you
  25. NHMRC ADWG: Nitrate and nitrite fact sheet
  26. NHMRC ADWG: Hardness fact sheet
  27. Icon Water: Annual Drinking Water Quality Report 2018-19
  28. SA Water: Happy Valley water treatment plant fact sheet
  29. WA Health: chlorinated drinking water
  30. Power and Water: drinking water quality
  31. Hunter Water: what's in your water
  32. Icon Water: Drinking Water Quality Report 2024-25 (fluoride)
  33. Power and Water: Drinking Water Quality Report 2023
  34. IPART: Sydney Water operational audit report, Feb 2025 (fluoridation)
  35. NSW Health: fluoridation questions and answers
  36. Seqwater: fluoridation at Mt Crosby (0.8 mg/L dosing level)
  37. Seqwater: Logan zone water quality report, September 2026
  38. Seqwater: Sunshine Coast zone water quality report, September 2026
  39. Unitywater: what's in your water (fluoridation)
  40. Logan City Council: fluoride
  41. Barwon Water: water quality (fluoride 0.9 mg/L)
  42. Yarra Valley Water: fluoridation
  43. HealthyWA: fluoride facts for Western Australia
  44. SA Water: what's in your water (fluoride)
  45. Central Coast Council: drinking water quality
  46. Townsville City Council: DWQMP annual report 2024-25
  47. Queensland Health: answers on notice, 16 Dec 2022 (areas without fluoridation)
  48. Toowoomba Regional Council: water quality and fluoridation

Explore by Topic

Written for Australian supplies, with the guideline values and utility data behind each recommendation.

Free · 32-page PDF

The 7-Room Home Audit

38 checks across water, air and EMF, room by room. 29 cost nothing. Ranked by impact and checked against Australian guidelines.

  • Every room on a floor plan, with each check marked
  • The numbers that matter: Australian guidelines on one page
  • A 30-day plan that puts the free fixes first

We'll email you the audit and a short series of practical guides. Unsubscribe in one click, any time. Privacy.

Sent. Taking you to your download...