Water Filtration

If you rely on bore water or a private well in Australia, nobody is testing it for you. Unlike mains supply regulated by state health departments and…

Australian tap water fluoride levels are regulated under the ADWG at a target range of 0.6 to 1.1 mg/L depending on climate, but actual concentrations…

The Australian Drink ing Water Guidelines (ADWG) set a health-based guideline value of 50 mg/L for nitrate (as NO₃) in drinking water, primarily to…

Rainwater collected from a properly maintained roof and tank system is generally safe to drink in most parts of Australia, according to the NHMRC…

If you’re choosing between the Waterdrop G3P800 and the AquaTru Classic for your Australian home, the decision comes down to one question: can you –…

Melbourne has the softest tap water of any Australian capital at approximately 25 mg/L CaCO₃, and uses free chlorine rather than chloramine for…

Sydney tap water is soft — around 50 mg/L CaCO₃ according to Sydney Water’s Annual Report — which means the hard-water mineral trigger behind eczema…

Earth’s Water and HolyH2O both sell hydrogen water products in Australia, but they solve different problems. Earth’s Water is an Australian brand…

Brisbane tap water uses chloramine disinfection — not free chlorine — and that distinction matters more for eczema than anything else in your water…