21 min read

Best Fridge Water Filter Australia 2026: Samsung, LG, Westinghouse & Fisher & Paykel

Your fridge dispenser delivers around 2–4 litres of water per day into glasses and ice — and every drop passes through a filter that most Australians replace years too late, or never. This guide covers the four dominant Australian fridge brands, confirms which third-party cartridges genuinely fit, and shows you the correct model number to order so you don’t waste $20 on the wrong part.

What Your Fridge Filter Actually Removes (And What It Doesn’t)

Every fridge water filter in this guide uses a carbon block cartridge certified to NSF/ANSI Standard 42 — the aesthetic-only standard covering taste, odour, and chlorine reduction. That is not the same as NSF 53 (health effects) or NSF 58 (reverse osmosis). Understanding the distinction matters for where you live.

What fridge filters genuinely do: Remove free chlorine taste and odour, reduce sediment and particulates, filter some chlorine by-products, and improve the taste of your fridge’s ice. In Melbourne, Hobart, Canberra, Townsville, and Cairns — all free-chlorine cities — a fridge filter is a meaningful water quality upgrade. Your tap water uses standard chlorination, and a quality carbon block removes it effectively.

Where fridge filters fall short in Australia: Brisbane, Sydney, Adelaide, Perth, and Darwin all use chloramine as their primary disinfectant — not free chlorine. Chloramine removes at approximately 1/40th the rate of free chlorine through standard carbon. Your fridge filter will improve taste in these cities, but it is not removing the disinfectant to the degree the certification implies. If you are in a chloramine city and water quality is a health concern, a dedicated under-sink or countertop RO system is the right tool. Your fridge filter still matters — a clogged or expired one adds bacterial growth risk — but set realistic expectations on what it purifies.

How to Find Your Fridge Filter Model Number

Before buying any replacement filter, confirm your exact part number. Using the wrong cartridge either won’t seat correctly or will bypass the filter housing entirely — delivering unfiltered water while showing a green “filter OK” indicator. There are three ways to find yours:

• Check the existing filter: Open your fridge’s filter compartment (typically upper-left interior, bottom kick-plate, or left door column depending on model). The part number is printed on the cartridge label.
• Check your fridge’s model sticker: Usually inside the door frame or on the back. Search “[fridge model number] + water filter” to confirm the correct part.
• Use the compatibility tables below: The four products in this guide cover the vast majority of Samsung, LG, Westinghouse/Electrolux, and Fisher & Paykel models with built-in water dispensers in Australia.

The 4 Best Fridge Water Filters in Australia 2026

Best for Samsung Fridges — OHFULLS DA29-00020B 3-Pack

The DA29-00020B is the single most common Samsung fridge filter in Australia, fitting every Samsung French door and side-by-side model sold here from approximately 2012 onwards — the SRF series, SRS series, and RS series all use it. Samsung charges $38–$45 for a single OEM cartridge. The OHFULLS 3-pack at $39.99 delivers equivalent NSF 42 + WRAS certified performance for less than the price of one genuine Samsung unit.

What makes the OHFULLS stand out against cheaper competitors is the use of coconut shell carbon in a block construction (not granular activated carbon). Block carbon has higher surface area and more consistent flow — granular carbon channels water around filter media, reducing contact time. At 166 reviews and 4.5 stars on Amazon AU, it has a meaningful local track record. If you have a Samsung fridge with a built-in water dispenser or ice maker, this is the one to buy.

Compatibility	DA29-00020B, HAF-CIN/EXP, DA29-00020A, DA97-08043ABC
Certification	NSF/ANSI 42 + WRAS
Filter media	Coconut shell carbon block
Rated life	6 months / 2,270L
Per-filter cost	$13.33 (3-pack at $39.99)
Rating	4.5 ★ (166 reviews)

Best for LG Fridges — Crystal Pure LT1000P 4-Pack

LG’s Australian fridge range splits across two filter generations. The current-generation LT1000P fits LG models sold from approximately 2018 onwards — if your fridge is a GF-V708MBSL, GF-V910MBSL, or similar, this is your filter. LG’s older LT700P (ADQ36006101) is a separate part used in earlier models including some GF-L series units. Check the label on your existing filter before ordering.

At $12.49 per cartridge, this is the best value filter in this guide by raw cost. Buying a 4-pack means you cover two full years of replacements at one purchase — useful if your fridge is in a beach house or rental property where sourcing parts quickly is inconvenient. Confirm your model number first; if you’re unsure whether you have LT1000P or LT700P, pull the existing filter and check the part code on the label before ordering.

Compatibility	LT1000P, ADQ747935, ADQ74793501
Fridge models	GF-V708MBSL, GF-V910MBSL, GF-L570PL, GF-L690PL
Filter media	Carbon block
Rated life	6 months / ~760L
Per-filter cost	$12.49 (4-pack at $49.95)
Rating	4.7 ★

Best for Westinghouse & Electrolux Fridges — Crystal Pure EPTWFU01 2-Pack

Westinghouse and Electrolux share the same parent company (Electrolux AB) and many of their Australian fridge models share filter standards. The EPTWFU01 is the current-generation standard for Westinghouse French door models sold in Australia. If your fridge is a WSE6870SA, WHE6874SA, or similar three-door French door model, this is your filter.

The primary downside is availability: unlike Samsung and Fisher & Paykel picks that come in 4-packs, the Westinghouse-compatible Crystal Pure only ships in 2-packs — raising the per-filter cost to $19.98 versus $12–$14 for the other brands. If you have two Westinghouse fridges or want a 2-year supply, buying two 2-packs at once is your best option. Check your existing filter label: EWF01 and EPTWFU01 look similar but are different parts — the newer EPTWFU01 is what current models use.

Compatibility	EPTWFU01, EWF02, 807946705, 4562222
Fridge models	WSE6870SA, WHE6874SA, FGSC2335TF, FPBC2277RF (25+ models)
Filter media	Carbon block
Rated life	6 months
Per-filter cost	$19.98 (2-pack at $39.95)
Rating	4.7 ★

Best for Fisher & Paykel Fridges — Crystal Pure 836848 4-Pack

Fisher & Paykel is a genuinely Australian brand (technically NZ-owned, now under Haier Group but still designed and sold as an Australian premium brand), and their fridges are common in Australian homes built in the 2010s–2020s. The most popular models — E522B, E402B, E442B — all use the 836848 filter standard. This Crystal Pure 4-pack earns the highest rating of any filter in this guide: 4.9 stars, which is exceptional for a product category where buyers are always comparing fit and performance.

Genuine Fisher & Paykel replacement filters (part 836848) retail at Winning Appliances and other AU retailers for $40–$50 for a single filter. The Crystal Pure 4-pack at $52.95 delivers all four for what you’d pay for one OEM unit. For F&P owners, this is among the clearest value cases in this guide — just confirm your model number from the list above before ordering.

Part numbers	836848, 836860, 862284, 862285, EFF-6017A
Fridge models	E522B, E402B, E442B, E404BRXFDU, RF90A180DU, RS9120WRJ1
Filter media	Carbon block
Rated life	6 months
Per-filter cost	$13.24 (4-pack at $52.95)
Rating	4.9 ★ (highest in guide)

Annual Filter Cost Comparison

Replacing your fridge filter every 6 months costs between $25 and $40 per year when buying multi-packs. OEM single cartridges for these same fridge brands typically run $38–$50 each — meaning one genuine filter costs more than a full year of third-party replacements. The chart below uses 2 replacements per year (the standard recommended interval) based on multi-pack pricing.

Australian Water Chemistry and Your Fridge Filter

Australia’s major cities split into two disinfection groups, and this matters more than any other factor when evaluating what your fridge filter actually does for you:

The practical takeaway for households in Brisbane, Sydney, or Perth: keep replacing your fridge filter on schedule (bacterial growth in an expired filter is a genuine health issue) but don’t rely on it for contaminant reduction. A $12–$14 replacement filter every 6 months is still worth doing — it improves taste and removes sediment — just understand what it can and can’t do. For fluoride, PFAS, or heavy metal reduction in any Australian city, you need reverse osmosis, not a fridge filter. See our full guide to Australian water filtration options →

How Often to Replace Your Fridge Filter

The standard recommendation is every 6 months or at the volume rating on your cartridge (typically 600–800 litres), whichever comes first. Most Australians ignore the filter indicator light for months. Here is what actually happens when you do:

• 0–6 months: Filter performs at rated capacity. Chlorine, sediment, and taste-affecting compounds are being reduced effectively.
• 6–12 months: Carbon media becomes saturated. Filtration effectiveness drops significantly. Taste degrades. The indicator light has likely been on for months.
• 12+ months: Spent carbon can begin releasing previously trapped compounds back into the water — a phenomenon called “dumping.” Bacterial biofilm may develop in the saturated media. This is not theoretical; it has been documented in laboratory studies of expired carbon filters. At this stage, the filter is actively making your water worse than unfiltered tap water.

The 6-month interval is not a marketing device — it reflects the genuine carbon saturation curve for the volume of water a typical Australian household runs through a fridge dispenser. A family of four using 3L/day hits approximately 540L in 6 months, close to the rated 600L limit. If your household uses the ice maker heavily, move to a 5-month interval.

What NOT to Buy

Which Fridge Filter Do I Actually Need?

Final Verdict

Fridge water filters are one of the most consistently neglected maintenance items in Australian households — not because they’re expensive, but because the reminder (a coloured LED) is easy to dismiss. At $12–$20 per filter in multi-packs, the cost argument for skipping a replacement has no basis. For most Australians, the Fisher & Paykel Crystal Pure 4-pack (4.9 ★) or the OHFULLS Samsung 3-pack (NSF 42 + WRAS, $13.33/filter) represent the best combination of value, certification, and buyer confidence.

If you are in a chloramine city — Brisbane, Sydney, Perth, Adelaide, Darwin — pair your fridge filter with an under-sink RO system for complete coverage. The fridge filter handles convenience and ice quality; the RO handles the chloramine, PFAS, and fluoride that a carbon block cannot. See our full comparison of Australia’s best RO systems in 2026 →

Frequently Asked Questions

How often should I change my fridge water filter in Australia?

Every 6 months or at the volume rating printed on your cartridge (typically 600–800 litres), whichever comes first. A family of four using 3 litres per day from the dispenser will reach 540 litres in 6 months — close enough to the rating that 6 months is the right interval. Heavy ice maker usage shortens the effective life further. An expired carbon filter does not just stop working — it can release previously trapped compounds back into your water, so replacement timing matters.

Are third-party fridge filters as good as OEM (genuine brand) cartridges?

For the products in this guide: yes. NSF/ANSI 42 certification and WRAS approval are third-party laboratory certifications — the filter either passes the test or it doesn’t. The OHFULLS Samsung filter and Crystal Pure range both carry these certifications and use the same coconut shell carbon block media as OEM cartridges. Samsung, LG, Westinghouse, and F&P do not manufacture their own filter media — it is sourced from specialist carbon media suppliers. The OEM premium reflects brand margin, not superior filtration performance.

Do fridge water filters remove fluoride in Australia?

No. Carbon block fridge filters — including NSF 42 certified ones — cannot remove fluoride. Fluoride removal requires reverse osmosis (90–97% reduction) or activated alumina (80–95%). If fluoride removal is your goal, you need a dedicated RO system, not a fridge filter. See our guide to Australian water filtration options →

Do fridge filters remove chloramine in Brisbane, Sydney, Perth, and Adelaide?

Partially, but not meaningfully. Chloramine removes through carbon at approximately 1/40th the rate of free chlorine. Standard carbon block fridge filters are rated for free chlorine removal (NSF 42) and will improve taste in chloramine cities, but they are not designed for or effective at chloramine reduction at rated flow rates. For genuine chloramine reduction, you need catalytic carbon (a specific carbon type), compressed carbon block with extended contact time, or reverse osmosis. An under-bench RO system like the Waterdrop D6 handles chloramine, PFAS, and fluoride simultaneously.

My Samsung fridge shows “Change Filter” but I just replaced it — why?

The filter indicator on Samsung fridges is a timer, not a sensor. It runs on a countdown from the last reset, not from actual water volume or filtration quality. After installing a new filter, you must manually reset the indicator. On most Samsung models: press and hold the “Ice Type” or “Child Lock” button for 3–5 seconds until the indicator light turns blue or the display confirms “Filter Reset.” Consult your fridge manual for the exact button combination — it varies by model.

What is the difference between LT700P and LT1000P LG filters?

LT700P (ADQ36006101) is LG’s older filter standard used in models produced approximately 2015–2018. LT1000P (ADQ747935) is the newer standard for LG models sold from 2018 onwards in Australia, including the current GF-V and GF-L series. They are physically different parts and are not interchangeable. Check the label on your existing filter — it will state either LT700P or LT1000P — before ordering a replacement. Inserting the wrong filter type will result in it not seating correctly or water bypassing the filter entirely.

Can I run a fridge dispenser without a filter installed?

On most Samsung and LG models, yes — there is a bypass plug (a plastic insert shaped like the filter) that allows water to flow through the dispenser unfiltered. This is a valid short-term option while waiting for a replacement filter to arrive. It is not a long-term solution: running without a filter removes no contaminants or sediment, and the open housing can accumulate biofilm if left for extended periods. If your fridge did not come with a bypass plug, contact the manufacturer — they are available as spare parts.

How do I know if my Westinghouse fridge has a built-in water filter?

Not all Westinghouse fridges have internal water filtration. Built-in filter models are French door (bottom freezer) designs with a water and ice dispenser on the door. The filter is typically located in the upper-left interior of the fridge compartment or behind a cover panel in the top-right corner. If your fridge has a water dispenser but you have never replaced the filter, open the interior and look for a cylindrical cartridge housing. If there is no dispenser on the door, your fridge does not have an internal filter.