Waterdrop C1S vs C1H (2026): Which Countertop RO Should You Buy in Australia?
Drafted with AI assistance and checked against published specifications and certifications. First-hand measurements appear only where stated. How we make content
How this assessment was made. I own and tested the Waterdrop C1S: I bought it on Amazon AU on 4 November 2026 and measured it in my Palm Beach, QLD kitchen (full results in my Waterdrop C1S review). I have not tested the C1H. Its details come from Waterdrop’s Australian page, its user manual and the Amazon AU listing, all checked on 7 Nov 2026, and I say where a figure is Waterdrop’s rather than mine. Drafted with AI assistance and checked against the sources: how we make content.
The Waterdrop C1S and C1H are the same countertop reverse osmosis machine with one difference: the C1H heats water instantly, with five settings up to about 95 °C, and has a child lock. Both use the same C1RF filter, the same 3:1 pure-to-drain ratio and the same 29.7 x 21.1 cm footprint. On 7 Nov 2026 the C1H was $374.14 online and the C1S was $379.22, so if you would use hot water, the C1H is the better buy at that price. If you only want cold drinking water, buy the C1S.
I spent my working life as a Royal Australian Navy Clearance Diver, and the habit stuck: compare equipment on what it measurably does, not on the box. I have the C1S on my bench, so this comparison starts from real numbers: it took my Gold Coast tap water from 69 ppm to 7 ppm TDS.
Same filter, same filtration, same size. Pay for the C1H only if you will use the hot water, and check both prices on the day: they move often.
| Model | Best for | Amazon AU |
|---|---|---|
| Waterdrop C1H | Tea and coffee drinkers; hot and room-temperature water | Currently unavailable on Amazon AUas of 19 Nov 2026, 5:43 pm AEST Details |
| Waterdrop C1S | Cold drinking water only; the unit I tested | $379.22at Amazon AU · as of 19 Nov 2026, 11:43 pm AEST Details |
| C1RF filter (fits both) | 12 months or 1,100 US gal | $99.99at Amazon AU · as of 19 Nov 2026, 8:43 pm AEST Details |
What is the same
Underneath, these are one design. Waterdrop lists the same 6-stage filtration with an RO membrane, the same C1RF twist-lock filter rated for 12 months or 1,100 US gallons, the same 75 gallons-per-day output, the same 3:1 pure-to-drain ratio, the same 29.7 x 21.1 x 34.8 cm body and the same 6.35 kg weight.
You use them the same way: fill a feed tank of about 3.2 L at the tap, the pump pushes it through the filter into a detachable pure-water pitcher, and you dispense from a touch screen that shows TDS and filter life. Neither needs plumbing. On both, Waterdrop says not to use source water above 500 ppm TDS.


What is different
| Feature | Waterdrop C1S | Waterdrop C1H |
|---|---|---|
| Water temperature | Room temperature only | Room temperature plus 4 hot settings: about 45, 65, 85 and 95 °C (5 settings in total) |
| Heating | None | Instant, Waterdrop quotes about 3 seconds |
| Child lock | Not listed | Yes |
| Amazon AU price | $379.22at Amazon AU · as of 19 Nov 2026, 11:43 pm AEST Details | Currently unavailable on Amazon AUas of 19 Nov 2026, 5:43 pm AEST Details |
| Waterdrop AU store | $499 list | Listed as discontinued |
The C1H’s temperatures come from its manual, which lists 113, 149, 185 and 203 °F plus room temperature; I have converted them. Waterdrop says it heats on demand in about 3 seconds.
My C1S results
| Test | My result |
|---|---|
| Gold Coast tap water | 69 ppm TDS (handheld meter) |
| C1S output, same meter | 7 ppm, a 90% drop |
| C1S built-in display | 3 ppm |
| Setup, including the automatic flush | About 20 minutes, no tools |
| 8 oz preset into a glass | 20.50 seconds |
| Noise and taste | Very little noise; clean taste from the first glass |
Because both machines use the same C1RF filter and membrane, I would expect the C1H’s cold output to land in the same range on the same water, but that is an expectation, not a measurement. My meter is a consumer TDS meter and is not calibrated. Photos, the full setup and the running costs are in my Waterdrop C1S review.


C1S or C1H chooser
Answer three questions. Put in the C1H price you see today, because the gap between these two moves week to week.
Waterdrop C1S vs C1H: side-by-side specifications
| Spec | Waterdrop C1S | Waterdrop C1H |
|---|---|---|
| Filtration | 6-stage, C1RF with RO membrane | 6-stage, C1RF with RO membrane |
| Filter life | 12 months or 1,100 US gal | 12 months or 1,100 US gal |
| Rated output / ratio | 75 GPD / 3:1 | 75 GPD / 3:1 |
| Feed tank / pure pitcher | 3.2 L / about 1 L (4 cups) | 110 oz (about 3.2 L) / about 1 L (4 cups) |
| Hot water | No | 5 settings to about 95 °C |
| Volume presets | 4, 8, 16, 20 oz, MAX | 5 presets |
| Display | TDS, filter life, flush progress | TDS, temperature, filter life |
| Child lock | Not listed | Yes |
| Certification | NSF/ANSI 372 (lead-free materials) | NSF/ANSI 372 (lead-free materials) |
| Size / weight | 29.7 x 21.1 x 34.8 cm / 6.35 kg | 29.7 x 21.1 x 34.8 cm / 6.35 kg |
| Warranty | 1 year | 1 year |
| Tested by Clean and Native | Yes, 69 to 7 ppm | No |
I could not confirm an NSF/ANSI 58 certification, the performance standard for reverse osmosis, for either model. Waterdrop’s Australian C1H page claims NSF/ANSI 58 testing by IAPMO R&T, but its UK page, the C1S page and the Amazon AU listings state NSF/ANSI 372 (lead-free materials) only, so I have used 372 until a certificate listing confirms 58. The contaminant-reduction claims come from Waterdrop’s third-party lab testing (the Amazon listings name SGS).
What 95 °C hot water is good for
Water at 85 to 95 °C covers plunger coffee, instant noodles and most tea, though black-tea purists will still want a kettle. Green tea is commonly brewed at 70 to 80 °C; the C1H has no setting in that band, so 65 or 85 °C is the closest. If your household drinks several hot drinks a day, it means one less appliance boiling a full kettle each time.
Availability and filters
Waterdrop’s Australian store listed the C1H as discontinued when I checked, while WaterdropDirect AU still had it in stock on Amazon AU (Currently unavailable on Amazon AUas of 19 Nov 2026, 5:43 pm AEST Details). That may be why it is discounted. If you buy one, filters are not a worry: the C1RF fits both the C1S and the C1H, and it was $99.99 online.
Countertop RO + hotC1RF filter | 5 temperature settings to about 95 °C | Child lock | 3:1 | NSF/ANSI 372 | Not tested by me
Check the C1H price on Amazon AU →
Countertop ROC1RF filter | Room temperature | 69 to 7 ppm in my test | 3:1 | NSF/ANSI 372
Check the C1S price on Amazon AU →Amazon AU price: $379.22 · as of 19 Nov 2026, 11:43 pm AEST Details
Annual filter12-month lifeFits C1S and C1H | 12 months or 1,100 US gal | Twist-lock
Check the C1RF price on Amazon AU →Amazon AU price: $99.99 · as of 19 Nov 2026, 8:43 pm AEST DetailsCheck all seven rooms, not just this one
38 checks, 29 free, ranked by impact. Sent as a 32-page PDF.
We'll email you the audit and a short series of practical guides. Unsubscribe in one click, any time. Privacy.
Sent. Taking you to your download...
Setting up either one
Setup is the same process on both, because the filter, tank and flush routine are the same. On my C1S it took about 20 minutes from opening the box to clean water, and most of that was the machine flushing itself. The steps:
- Peel the black film off the screen. Both Amazon listings warn about this; the touch keys will not respond properly with it on.
- Fit the C1RF filter into the top of the unit and twist it clockwise until it locks. No tools.
- Fill the feed tank at the tap and slide it back in.
- Plug in and let it flush. The display counts up in percent. When it prompts you (Waterdrop says at about 50%), tip out what is left in the feed tank, refill with fresh tap water and let it finish to 100%. Do not drink the flush water.
- Optional: Waterdrop’s note card suggests flushing one or two more tanks to improve taste.
On the C1H there is one more step: set the child lock if children can reach the bench, and learn which key unlocks hot water before you need it.
Three-year cost of each
Because both use the same C1RF filter, the running cost is identical and the purchase price decides it. Over three years, with the filter changed every 12 months as Waterdrop rates it, at the prices I checked:
| Cost item | Waterdrop C1S | Waterdrop C1H |
|---|---|---|
| Unit (7 Nov 2026) | $379.22 | $374.14 |
| Two replacement C1RF filters (years 2 and 3) | $199.98 | $199.98 |
| Three-year total | $579.20 | $574.12 |
Electricity is left out: the C1S manual lists 50 W, and Waterdrop does not publish the C1H’s heating power on the pages I checked, so I have not estimated it. If you drink more than about 4,164 L a year (roughly 11 L a day), the filter would need changing more often than once a year on either model.
Day-to-day differences
Cold water works the same on both: tap a volume, press dispense, and the pump pours from the pitcher. My C1S filled its 8 oz preset in 20.50 seconds. The presets differ slightly: the C1S label lists 4, 8, 16 and 20 oz and MAX, while the C1H manual gives examples including 8, 16, 20 and 40 oz and MAX, which suits filling a teapot or a pot of water for cooking.
The C1H adds a temperature choice before you dispense, and its screen shows temperature as well as TDS and filter life. On my C1S, the OUT icon tells you to empty and refill the feed tank, and the concentrate appears to go back into that tank rather than to a drain, so you tip out the leftover at each refill. The C1H uses the same body and feed tank, so expect the same routine: carrying a 3.2 L tank to the tap.


Water quality: what you can expect from both
Filtration is the same membrane and the same cartridge, so the cold water should be equivalent. On my Gold Coast tap water the C1S dropped TDS from 69 to 7 ppm on my meter. Waterdrop’s own claims, from third-party lab testing, cover lead, TDS, PFOA, PFOS, fluoride, chlorine, copper and arsenic; a TDS meter cannot check those individually, so treat them as Waterdrop’s figures, not mine.
Two limits apply to both. Waterdrop says not to use source water above 500 ppm TDS, and the manual says not to use water that is microbiologically unsafe or of unknown quality. Treated mains water in Australian cities is usually well under that TDS limit; untreated rainwater tank or bore water is not what these units are designed for.
If neither is right for you
| If you want | Look at | Why |
|---|---|---|
| Hot and chilled water | Waterdrop A2, $719.10 online | Adds chilled water; larger and pricier; not tested by me |
| No tank to refill | An under-sink RO such as the EcoHero | Plumbed in; mine reads 3 ppm on the same meter; needs installation |
| Cheapest no-plumbing filtration | A certified jug or benchtop filter | Much cheaper, but not RO; see the countertop guide |
More detail in my EcoHero review and affordable reverse osmosis filters, or compare every type, from jugs to RO, in the best water filters in Australia.
Who should buy which
✓ Buy the C1H if
- You drink tea or coffee most days
- It is the same price or less than the C1S, as it was when I checked
- You want room-temperature and hot water from one filter
- You are happy to use a child lock if kids are around
× Buy the C1S if
- You only want cold drinking water
- The C1H is back near its $509 price
- You want the simpler machine with no heater
- You want the unit I have tested and can vouch for
Verdict
These are the same filter in the same body, so the decision is simply whether hot water is worth it to you at today’s prices. When I checked, the C1H was $5 cheaper, which makes it the better buy for anyone who drinks hot drinks. If you want cold filtered water and nothing else, the C1S is the one I have on my own bench and the one I can back with my own numbers.
Still deciding between countertop RO and other options? See the best countertop water filters, Waterdrop C1S vs AquaTru and the best reverse osmosis systems in Australia.
Prices on these two change often. Both checked on Amazon AU on 7 Nov 2026.
Frequently asked questions
What is the difference between the Waterdrop C1S and C1H?
The C1H adds instant hot water, with five settings up to about 95 C, and a child lock. Otherwise they share the C1RF filter, 6-stage filtration, 3:1 ratio, 75 GPD rating and the same 29.7 x 21.1 x 34.8 cm body.
Is the Waterdrop C1H worth it over the C1S?
If you drink hot drinks and the price gap is small, yes. On 7 Nov 2026 the C1H was $374.14 and the C1S $379.22 online, so the C1H was the better buy for tea and coffee drinkers.
Do the C1S and C1H use the same filter?
Yes. Both use the Waterdrop C1RF, rated for 12 months or 1,100 US gallons. It was $99.99 online when checked.
Does the Waterdrop C1H boil water?
No. Its hottest setting is about 95 C (203 F in the manual). For anything that needs boiled water, such as making infant formula, use a kettle.
Is the Waterdrop C1H discontinued in Australia?
Waterdrop’s Australian store listed it as discontinued when checked on 7 Nov 2026, but it was still in stock on Amazon AU from WaterdropDirect AU.
How much does it cost to run a Waterdrop C1S or C1H?
One C1RF filter a year, $99.99at Amazon AU · as of 19 Nov 2026, 8:43 pm AEST Details when checked. Over three years, including the unit, that was $579.20 for the C1S and $574.12 for the C1H at 7 Nov 2026 prices, before electricity.
Can I use rainwater or bore water in the C1S or C1H?
Not untreated. Waterdrop says to use only microbiologically safe water under 500 ppm TDS. Treated mains water is what both are designed for.
How well does the Waterdrop C1S filter?
In my kitchen it took Gold Coast tap water from 69 ppm to 7 ppm TDS on a handheld meter, a 90% drop. Its own display read 3 ppm.
- Amazon AU: Waterdrop C1H listing (price, NSF/ANSI 372, SGS testing, 3 s heating, 5 temperatures), checked 7 Nov 2026
- Amazon AU: Waterdrop C1S listing, checked 7 Nov 2026
- Amazon AU: Waterdrop C1RF filter (fits C1S and C1H), checked 7 Nov 2026
- Waterdrop Australia: C1H page (discontinued, 6-stage, 75 GPD, 3:1, size and weight, child lock), checked 7 Nov 2026
- Waterdrop UK: C1H page (NSF/ANSI 372, 5 temperature settings to 203 F)
- Waterdrop WD-C1H manual (110 oz feed tank, 4-cup pure tank, 113/149/185/203 F settings, child lock)
- Waterdrop Australia: C1S page, checked 7 Nov 2026
- Pregnancy, Birth and Baby (healthdirect): how to make infant formula, boil then cool the water
The 7-Room Home Audit
Your tap water is one room. The audit covers all seven: 38 checks across water, air and EMF, 29 of them free, ranked by impact against Australian guidelines.
- Morning tap flush: the free lead fix most homes skip
- How to read your utility's water quality report
- Renting or owning: the two reverse osmosis filters I use at home
We'll email you the audit and a short series of practical guides. Unsubscribe in one click, any time. Privacy.
Sent. Taking you to your download...
