TriField TF2 vs Safe and Sound Pro II Australia 2026: Which EMF Meter to Buy
Drafted with AI assistance and checked against published specifications and certifications. First-hand measurements appear only where stated. How we make content
How this assessment was made. I own a TriField TF2, and every TF2 reading and photo on this page is mine, taken in my house in Palm Beach, QLD. I have not used a Safe and Sound Pro II: it is assessed from Safe Living Technologies’ product page and operation manual and its Australian listings. Specifications come from each maker’s manual; prices were checked on Amazon AU and SaferEMF on 3 Nov 2026. Clean and Native may earn a commission on some links.
Buy the TriField TF2 ($289) if you want one meter for the whole house; buy or hire the Safe and Sound Pro II ($499 to $569.95) if your question is how low the RF is where you sleep. The TF2 reads all three field types: AC magnetic, AC electric and RF from 20 MHz to 6 GHz. The Pro II reads RF only (it detects 200 MHz to 8 GHz, with its ±6 dB accuracy specified from 400 MHz to 7.2 GHz), but far lower: it is linear from 0.1 µW/m², and the maker lists sensitivity down to 0.001 µW/m², where the TF2 bottoms out at 1 µW/m². For most homes the best value is to own a TF2 and hire a Pro II for three days ($99) once you have made your changes.
In the Navy, the first thing you learned about any instrument was where it stops telling the truth. These two meters stop in different places. That, not the spec sheet length, is how to choose between them.
Different tools, not rivals. The TF2 finds and compares sources across the house; the Pro II confirms a bedroom is genuinely low in RF. Prices checked 3 Nov 2026.
| Meter | Best for | Price |
|---|---|---|
| TriField TF2 | Whole-home audit: wiring, appliances and RF in one meter | $299.00at Amazon AU · as of 19 Nov 2026, 11:43 pm AEST Details |
| Safe and Sound Pro II | Bedroom RF, down to the building biology “no concern” line | $499 to $569.95 |
| Own TF2, hire Pro II | Both answers, $400 to $471 less than buying both | $289 + $99 hire |
My meter3 fieldsmagnetic, electric and RFAC magnetic 0.1 to 100 mG, three-axis | AC electric 1 to 1,000 V/m | RF 20 MHz to 6 GHz, 1 to 19,999 µW/m² | 3-second peak hold | 9 V battery, more than 20 h | 1-year warranty
Check the TF2 Price on Amazon →Amazon AU price: $299.00 · as of 19 Nov 2026, 11:43 pm AEST Details
Linear from0.1 µW/m²sensitive to 0.001 µW/m²RF only: detects 200 MHz to 8 GHz | ±6 dB from 400 MHz to 7.2 GHz | PEAK, MAX and AVG in µW/m² or V/m | Rechargeable, USB-C | 2-year warranty | Sold on Amazon AU by the maker
Check the Pro II Price on Amazon →Amazon AU price: $569.95 · as of 19 Nov 2026, 5:29 pm AEST Details✓ Choose the TriField TF2 if
- You are auditing a whole house for the first time
- You want to check wiring, a switchboard, appliances or a bedhead, not just Wi-Fi
- You want one meter to own for under $300
- You are comparing before and after moving a router or bed
× Choose the Safe and Sound Pro II if
- Your concern is RF in a bedroom or nursery specifically
- You want to measure against building biology sleeping guidance (under 0.1 µW/m²)
- You want to identify sources by sound: Wi-Fi, DECT, smart meter
- You already own a TF2 or a gauss meter for the low-frequency fields
Specifications side by side
| Spec | TriField TF2 | Safe and Sound Pro II |
|---|---|---|
| Fields measured | AC magnetic, AC electric, RF | RF only |
| RF frequency range | 20 MHz to 6 GHz | Detects 200 MHz to 8 GHz; specified (±6 dB) from 400 MHz to 7.2 GHz |
| RF range | 0.001 to 19.999 mW/m² (1 to 19,999 µW/m²) | Linear from 0.1 to 1,000,000 µW/m²; reduced tolerance down to 0.005 (manual); maker lists sensitivity to 0.001 |
| RF accuracy | ±20%, specified at 1 GHz only | ±6 dB from 400 MHz to 7.2 GHz |
| Magnetic field | 0.1 to 100 mG, three-axis, 40 Hz to 100 kHz, ±4% at 50 Hz | Not measured |
| Electric field | 1 to 1,000 V/m, single-axis, ±5% at 50 Hz | Not measured |
| Peak capture | Captures bursts every 12 ms; holds the highest for 3 s | PEAK, MAX (held until reset) and AVG readings; responds in under 5 µs |
| Sound | Audio indicator | Speaker with source sound signatures; headphone jack |
| Data logging | No | No |
| Power | 9 V battery, more than 20 h | Rechargeable, USB-C, 12 to 15 h per charge (product page) |
| Warranty | 1 year | 2 years |
| Price (3 Nov 2026) | $299.00at Amazon AU · as of 19 Nov 2026, 11:43 pm AEST Details; $289 SaferEMF | $569.95at Amazon AU · as of 19 Nov 2026, 5:29 pm AEST Details; $499 SaferEMF |
Sources: AlphaLab’s TF2 owner’s manual and Safe Living Technologies’ product page and manual. A note on units: 1 mW/m² is 1,000 µW/m². The TF2 displays RF in mW/m²; the Pro II in µW/m² (or V/m). Converting is the first step to comparing them, and it is where most comparison pages go wrong.
The difference that matters: the RF floor
The TF2’s RF display steps in 0.001 mW/m², which is 1 µW/m². Below that it shows 0.000. The German building biology guidelines for sleeping areas (SBM-2008) put “no concern” below 0.1 µW/m² and “slight” from 0.1 to 10 µW/m². So a TF2 showing 0.000 could mean a room in either band. A Pro II shows the number, and its linear range starts exactly at that 0.1 µW/m² line.
| SBM-2008 RF band (sleeping areas, peak) | µW/m² | TF2 can show it? | Pro II can show it? |
|---|---|---|---|
| No concern | Under 0.1 | No (reads 0.000) | Yes (below its linear range: an indication) |
| Slight | 0.1 to 10 | Only from 1 upward | Yes |
| Severe | 10 to 1,000 | Yes | Yes |
| Extreme | Over 1,000 | Yes, to 19,999 | Yes |
Two caveats keep this honest. First, the Pro II’s ±6 dB is roughly a factor of four in power density, so its absolute numbers are loose; it is strongest at comparing the same spot before and after a change. Second, SBM-2008 is precautionary building biology guidance, not a health limit. ARPANSA’s general public reference level for 2 to 300 GHz is 10 W/m² (10,000,000 µW/m²) averaged over 30 minutes, and ARPANSA says there is no established scientific evidence of health effects from RF below its limits.
My TF2 readings on both scales
These are my own TF2 RF readings, converted to µW/m² and placed on the Pro II’s LED steps (Safe Living Technologies’ thresholds at 2.4 GHz). It is a translation of the numbers, not a Pro II measurement: the meters have different antennas and accuracy, so a Pro II in the same spots would not read exactly the same.
| Where (my house) | TF2 reading | In µW/m² | Pro II LED step | SBM-2008 band |
|---|---|---|---|---|
| Close range to the modem and NBN box | 4.380 mW/m² | 4,380 | Red, solid | Extreme |
| Close range to the router | 3.058 mW/m² | 3,058 | Red, solid | Extreme |
| Same room, 2 to 3 m from the router | 0.521 mW/m² | 521 | Orange | Severe |
| Hallway | 0.124 mW/m² | 124 | Orange | Severe |
| Bed, at the pillow | 0.048 mW/m² (peak 0.150) | 48 (peak 150) | Yellow (peak in orange) | Severe |
| Living room couch | 0.032 mW/m² | 32 | Yellow | Severe |


Every one of my RF readings sat in the SBM “severe” or “extreme” bands, which the TF2 resolves easily. That is the practical lesson: in a typical house with a router inside, the TF2 shows you the problem. The Pro II earns its price after the fix, when you want to know how far down you have actually got. My router now runs on a timer, off from 9 pm to 6 am; see the router timer guide. Even my highest spot reading, at the modem, is more than 2,000 times below ARPANSA’s 10 W/m² reference level, which is a 30-minute average.
What each one misses
The Pro II misses everything that is not RF. Wiring, switchboards, power lines and appliances produce low-frequency magnetic and electric fields that it cannot see. In my house the TF2’s biggest magnetic reading was 49.8 mG at the gas oven door, and its electric readings ran up to 105 V/m at a timber bedhead. A Pro II held in either spot would show nothing about those fields.


The TF2 misses the bottom of the RF scale, as above, and anything above 6 GHz. Its range ends at the bottom of Australia’s 6 GHz Wi-Fi band (Wi-Fi 6E, 5,925 to 6,425 MHz), which sits inside the Pro II’s specified range. Neither meter reads mmWave 5G at 24 GHz and above. Below 200 MHz it is the other way round: the TF2 reaches down to 20 MHz, which includes FM radio, and the Pro II does not.
Both miss the overnight picture. Neither logs data. The TF2 holds a peak for only 3 seconds; the Pro II’s MAX holds the single highest peak since you last reset it. Smart meters transmit in short bursts (the TF2 manual says perhaps once a minute), so give each spot a minute or two with either meter before writing down a number.
✓ Pros
- TF2: all three field types for $289
- TF2: three-axis magnetic sensor with published accuracy at 50 Hz
- Pro II: reads RF far below the TF2, linear from 0.1 µW/m²
- Pro II: PEAK, MAX and AVG readings, sound signatures
- Pro II: 2-year warranty, rechargeable
× Cons
- TF2: RF floor of 1 µW/m²; RF accuracy stated only at 1 GHz
- TF2: 3-second peak hold, no MAX
- Pro II: RF only, specified from 400 MHz
- Pro II: ±6 dB accuracy, about a factor of four
- Both: no data logging
Check all seven rooms, not just this one
38 checks, 29 free, ranked by impact. Sent as a 32-page PDF.
We'll email you the audit and a short series of practical guides. Unsubscribe in one click, any time. Privacy.
Sent. Taking you to your download...
Which to buy: five situations
| Your situation | Buy | Why |
|---|---|---|
| First audit of a whole house | TF2 | Finds the strongest sources of all three field types in one pass |
| Bed against a wall with a switchboard or fridge behind it | TF2 | That is a magnetic and electric question; the Pro II cannot see it |
| Router moved or on a timer; want to confirm the bedroom is now low | Pro II (hire) | Only it reads below 1 µW/m² |
| Nursery or child’s room, measured against building biology guidance | Pro II | Shows the “no concern” band the TF2 cannot |
| Neighbour’s Wi-Fi or a nearby mobile tower | Either | The TF2 shows whether it is significant; the Pro II how low it gets |
The bedroom method step by step is in the EMF bedroom audit guide, and the measuring technique for each field in how to measure EMF at home.
Prices, hire and the cheapest way to get both
| Option | TriField TF2 | Safe and Sound Pro II |
|---|---|---|
| Amazon AU | $289 (sold by Aus Security Products) | $569.95 (sold by Safe Living Technologies, the maker) |
| SaferEMF, Gold Coast | $289 | $499 |
| SaferEMF hire, 3 days | $99 plus a $190 refundable deposit | $99 plus a $400 refundable deposit |
Buying both costs $788 to $859. Owning a TF2 and hiring a Pro II for three days costs $388, and gives you both answers: the TF2 for the whole-house audit and any time you move something, the Pro II for the final bedroom check. Watch for an older Amazon AU listing of the Pro II from a third-party seller whose description is for a different model, the Classic II; buy the listing sold by Safe Living Technologies.
Prices change. Check the retailer before buying.
Verdict
These are not two answers to the same question. The TriField TF2 is the meter I own and would buy again: one instrument for wiring, appliances and RF, at $289, with published accuracy at our 50 Hz mains. The Safe and Sound Pro II does the one job the TF2 cannot, which is showing how low the RF is where you sleep, down to the building biology “no concern” line. Buy the TF2 if you can only have one meter. Buy the Pro II if bedroom RF is your only concern and you will measure more than once. Own the TF2 and hire the Pro II if you want both answers for $388.
Full detail on each: my TriField TF2 review (19 readings from my house), the Safe and Sound Pro II review, and every meter compared in the best EMF meters in Australia.
Buy this if…
you want one meter for the whole house: the TF2. If your only question is bedroom RF, hire the Pro II.
Frequently asked questions
Which is better, the TriField TF2 or the Safe and Sound Pro II?
For one meter covering the whole house, the TF2: it measures AC magnetic, AC electric and RF fields for $289. For RF in a bedroom, the Pro II: it reads far lower, with a linear range from 0.1 µW/m², where the TF2 stops at 1 µW/m². Many people own a TF2 and hire a Pro II.
Does the Safe and Sound Pro II measure magnetic or electric fields?
No. It measures RF only, detecting 200 MHz to 8 GHz. For fields from wiring, switchboards and appliances you need a meter such as the TriField TF2.
Can the TriField TF2 measure low enough for a bedroom?
It can show whether a bedroom has strong RF, down to 1 µW/m². It cannot show the building biology “no concern” band, which is below 0.1 µW/m²; there it reads 0.000. For that check you need a meter like the Safe and Sound Pro II.
How much do the TF2 and Pro II cost in Australia?
On 3 Nov 2026: the TF2 was $289 online and at SaferEMF; the Pro II was $569.95 online (sold by the maker) and $499 at SaferEMF. SaferEMF hires both for $99 for three days, with a $190 (TF2) or $400 (Pro II) refundable deposit.
Do these meters measure 5G?
Both cover Australia’s 3.5 GHz 5G band. Neither measures mmWave 5G at 24 GHz and above. The TF2 stops at 6 GHz; the Pro II detects to 8 GHz, with its accuracy specified to 7.2 GHz.
Which is more accurate?
On different things. The TF2’s magnetic and electric accuracy is ±4% and ±5% at 50 Hz, but its RF accuracy is ±20% and stated only at 1 GHz. The Pro II’s RF accuracy is ±6 dB from 400 MHz to 7.2 GHz, about a factor of four. Both are best used for comparing the same spot before and after a change.
Do I need both meters?
Not to own. Owning a TF2 ($289) and hiring a Pro II for three days ($99) costs $388 and answers both questions: where the sources are, and how low your bedroom RF really gets.
- AlphaLab: TriField TF2 owner’s manual (ranges, accuracy, peak hold, battery, warranty)
- Safe Living Technologies: New Safe and Sound Pro II RF Meter, Rechargeable (specifications, LED thresholds, battery, warranty)
- Safe Living Technologies: Safe and Sound Pro II operation manual (display modes, measuring technique, ranges)
- Amazon AU: TriField EMF Meter Model TF2 (price, ratings, seller, 3 Nov 2026)
- Amazon AU: Safe Living Technologies Safe and Sound Pro II RF Meter (price, seller, 3 Nov 2026)
- SaferEMF: TriField TF2 (Australian price and hire)
- SaferEMF: Safe and Sound Pro II (Australian price and hire)
- Baubiologie Maes / IBN: Building Biology Evaluation Guidelines for Sleeping Areas, SBM-2008
- ARPANSA: Standard for Limiting Exposure to Radiofrequency Fields, 100 kHz to 300 GHz (RPS S-1)
- ARPANSA: mobile phone base stations (health effects below the RF standard limits)
The 7-Room Home Audit
Distance and off-time do most of the work, and they are free. The audit maps every room: 38 checks across EMF, air and water, ranked by impact.
- Our own TF2 readings from router to pillow
- What to check behind the bedhead wall
- ARPANSA limits and precautionary bands, side by side
We'll email you the audit and a short series of practical guides. Unsubscribe in one click, any time. Privacy.
Sent. Taking you to your download...
