Three-way filtered water tap filling a glass of drinking water at a kitchen sink in a coastal Queensland home

Best Filtered Water Tap Australia 2026: 3-Way Taps and Tap Filters

24 min read

Drafted with AI assistance and checked against published specifications and certifications. First-hand measurements appear only where stated. How we make content

How this assessment was made. This guide ranks the best filtered water tap setups for Australian kitchens on four checks: WaterMark certification for anything plumbed in, what the filter behind the tap is shown to remove and how that is evidenced (certified, or the maker’s published testing), fit for owners or renters, and cost. I have not installed or tested a 3-way tap or any of the tap-mount filters here. The one system I have used is the Pure Water Systems EcoHero reverse osmosis unit, under my former Palm Beach kitchen sink from mid-2025. Prices and listings were checked on 19 November 2026.

Affiliate disclosure: Clean and Native earns a commission on purchases made through links to Pure Water Systems, Waterdrop Australia and Amazon Australia, at no extra cost to you. Commission never changes the order of the picks. As an Amazon Associate, Clean and Native earns from qualifying purchases.

The best filtered water tap for most Australian homes is a WaterMark-certified 3-way mixer tap fed by an under-sink filter: it replaces your kitchen mixer, so hot, cold and filtered water come from one spout, with no second tap on the sink[1]. My pick is the Pure Water Systems Goose Neck 3 Way Mixer Tap paired with the Twin Quick Change filter. Renting? A certified tap-mount filter such as the PUR PLUS goes on without a plumber[12].

The tap is only the outlet. What comes out of it depends on the filter underneath, so this guide picks the tap and the filter together, and tells you which filter does what: carbon for chlorine taste and lead, reverse osmosis for fluoride.

Quick verdict | Clean and Native

Owners: a 3-way mixer tap plus the right under-sink filter. Renters: a certified tap-mount filter. Want fluoride out? The filter behind the tap has to be reverse osmosis.

PickBest forEvidencePrice
PWS Goose Neck 3 Way Mixer TapOne tap for hot, cold and filteredWaterMark AS/NZS 3718$419 (Pure Water Systems)
PWS Twin Quick Change (HTO+)The filter to feed it: chloramine, leadLead free WaterMark; maker-tested reduction$459 (Pure Water Systems)
PWS Single Quick Change (HTO+)Budget under-sink filterLead free WaterMark components$379 (Pure Water Systems)
EcoHero 5-stage ROFluoride: pair it with the 3-way tapWaterMark AS/NZS 3497 (register)Pure Water Systems
PUR PLUS tap-mount filterRenters; no plumberCertified NSF/ANSI 42, 53, 401Currently unavailable on Amazon AUas of 19 Nov 2026, 8:29 pm AEST Details
Waterdrop X8RO with its own smart faucetCertified NSF/ANSI 42, 58, 372 (IAPMO)$611.29at Amazon AU · as of 19 Nov 2026, 11:43 pm AEST Details

Pure Water Systems prices are its regular prices; it was running a Black Friday sale when checked. Installation by a licensed plumber is extra.

Tap chooser: two questions

Tap chooser | two questions

Do you own or rent?

What do you most want out of your tap water?

Start with

3-way mixer tap with the Twin Quick Change (HTO+)

Pure Water Systems publishes more than 99.7% lead reduction for the HTO+ cartridge, plus a 1-micron pre-filter in front of it.

See the pick ↓

✓ A 3-way tap suits you if

  • You own your home and want filtered water without a second tap
  • Your sink or benchtop has no spare tap hole
  • You are replacing the kitchen mixer anyway
  • You want the filter hidden under the sink

× Look elsewhere if

  • You rent: use a tap-mount or countertop filter
  • You want boiling or chilled water on tap: see the boiling tap guide
  • You want fluoride out but will not fit reverse osmosis
  • You will not book a licensed plumber

The three kinds of filtered water tap

TypeHow it worksPlumberSuits
3-way mixer tapReplaces your kitchen mixer; a second lever runs filtered water from an under-sink filter through its own waterwayYesOwners; one tap hole
Dedicated filter faucetA small extra tap beside your mixer, fed by an under-sink filter or reverse osmosis systemYesOwners with a spare tap hole
Tap-mount filterScrews onto your existing tap in place of the aerator; a diverter switches between filtered and unfilteredNoRenters; cold water only

On a 3-way tap the filtered water never touches the hot and cold side: Pure Water Systems describes separate outlets and internal tubes that keep filtered and unfiltered water apart[1]. Boiling and chilled filtered taps such as Billi and Zip are a different, more expensive category; they are covered in our instant boiling filtered water tap guide.

How to choose a filtered water tap in 4 checks

1. Decide what the filter has to remove

Pick the filter first, the tap second. A carbon block filter is the technology for chlorine taste and odour, and good ones also reduce lead. Fluoride is different: the American Dental Association says “Most carbon filters do not remove fluoride”, while “almost all reverse osmosis systems and distillation units remove most of the fluoride”[10]. If your water is chloraminated (your utility’s water quality report says which), choose a filter that names chloramine in its claims; our chloramine filter guide explains why.

2. Check the paperwork on both parts

For anything plumbed in, Australia uses WaterMark. Water filters and replacement cartridges are on the WaterMark Schedule and must perform to AS 3497[9], and a licensed plumber is not permitted to install a listed product that is not certified[8]. Tapware has its own standard, AS/NZS 3718; the tap below publishes its certificate number. Separately, check what the filter is shown to remove: NSF/ANSI 42 covers aesthetic claims such as chlorine taste and odour, NSF/ANSI 53 covers contaminants with a health effect such as lead, and NSF/ANSI 401 covers emerging contaminants[11]. A lead free WaterMark on the filter housing tells you about its materials, not what the cartridge removes. More in WaterMark vs NSF.

3. Count your tap holes

A 3-way tap goes into the hole your mixer uses now. A dedicated filter faucet needs its own hole beside the mixer, which may mean drilling the sink or benchtop[1]. That one question often decides between the two.

4. Price the whole setup, not the tap

Add the tap, the filter, the plumber and the yearly cartridge. A filtered water tap is only as good as its last cartridge change, so check the rated life before you buy; our cartridge replacement guide covers intervals across brands.

Key takeaway: Filter first, tap second. WaterMark on everything plumbed in. Reverse osmosis if fluoride is on your list.

The best filtered water taps in Australia

Ranked as setups: the tap, then the filter that feeds it, then the options for fluoride and for renters. Amazon picks were in stock on Amazon Australia on 19 November 2026.

1. Pure Water Systems Goose Neck 3 Way Mixer Tap: best 3-way filtered water tap

Pure Water Systems Goose Neck 3 way mixer tap in chrome, with a separate lever for filtered waterWaterMarkAS/NZS 3718Certificate 23033
#1 Tap | Replaces your mixer
Pure Water Systems Goose Neck 3 Way Mixer Tap (chrome)

3-way mixer: hot, cold and filtered | Separate filtered waterway | Ceramic disc valves | WaterMark AS/NZS 3718, certificate 23033 (Pure Water Systems) | $419 chrome; other styles $419 to $549

See the Goose Neck 3 Way Tap →

The tap that turns any under-sink filter into filtered water from your main kitchen spout. Pure Water Systems lists it as WaterMark certified to AS/NZS 3718, certificate 23033, with ceramic disc valves and separate outlets so filtered and unfiltered water never mix[1]. Turn the small lever for filtered water; the main lever works as a normal mixer.

The same range comes in straight, square and low necks and in chrome, matte black and brushed stainless (a brushed nickel model was listed but unavailable), from $419 to $549 for a model with a retractable veggie sprayer hose[2]. Not every listing in the range shows the WaterMark certificate on its page, so if you choose a different style, ask Pure Water Systems for its certificate before your plumber arrives. Pure Water Systems describes the Goose Neck as an upgrade from the Slimline Faucet supplied with under-sink and reverse osmosis systems, so it works with either.

✓ Pros

  • One spout for hot, cold and filtered water
  • WaterMark certificate published for this model
  • Works with carbon or reverse osmosis systems

× Cons

  • Needs a licensed plumber
  • Tap only: the filter is a separate purchase
  • No warranty term stated on the listing

Buy this if

you own your home and want filtered water without adding a second tap to the sink.

Not for you if

you rent, or you want boiling or chilled water from the same tap.

2. Pure Water Systems Twin Quick Change (HTO+): best filter to feed it

Pure Water Systems Twin Quick Change under sink water filter cartridges for a filtered water tapLead (maker)>99.7%HTO+ at pH 6.5
#1 Filter | Under sink
Pure Water Systems Twin Quick Change Under Sink System (HTO+)

1-micron pre-filter + HTO+ cartridge | Names chlorine and chloramine | HTO+: lead >99.7%, specified PFOA/PFOS >95.5% (maker’s published testing) | 1,500 L or 12 months | Lead free WaterMark | Town water only | $459 (HTO+), $439 (HTO)

Check the Twin Quick Change →

Two stages under the sink: a 1-micron pre-filter, then the Hi-Tech Optimiser cartridge. Pure Water Systems says the system helps reduce chlorine, chloramine, unwanted tastes and odours, and that it is lead free WaterMark certified with NSF certified materials[3]. Choose the HTO+ cartridge: Pure Water Systems publishes more than 99.7% lead reduction at pH 6.5 and more than 95.5% reduction of specified PFOA and PFOS compounds for it, rated for up to 1,500 litres or 12 months[5]. Those are the maker’s published test results, not a certification of the cartridge, and its PFAS note says the results apply to the compounds tested, not all PFAS.

It is designed for treated town water only, the cartridges twist and release without opening a housing, and a cartridge life monitor tells you when to change them. Pure Water Systems says installation by a licensed plumber is required to keep the parts warranty. It makes no fluoride claim, which matches the ADA: carbon is not the fluoride answer[10].

✓ Pros

  • Names chloramine as well as chlorine
  • Published lead and PFOA/PFOS figures for HTO+
  • Twist-and-release cartridges with a life monitor

× Cons

  • Reduction figures are maker-published, not certified
  • No fluoride reduction
  • Town water only

Buy this if

you are on chlorinated or chloraminated town water and want lead and taste dealt with at a 3-way tap.

Not for you if

fluoride is your priority, or you are on tank or bore water.

3. Pure Water Systems Single Quick Change (HTO+): budget under-sink filter

Pure Water Systems Single Quick Change under sink water filter systemCapacity (HTO+)1,500 Lor 12 months
#2 Filter | Budget
Pure Water Systems Single Quick Change Under Sink System (HTO+)

Single HTO+ cartridge | Names chlorine and chloramine | Lead free WaterMark components | Cartridge life monitor | $379 (HTO+), $359 (HTO)

Check the Single Quick Change →

The same Hi-Tech Optimiser cartridge in a single housing, without the 1-micron pre-filter. Pure Water Systems lists chlorine, chloramine, tastes and odours, and says reduction depends on whether you choose the HTO or HTO+ cartridge[4]. It is $80 less than the Twin at regular prices. Pick the Twin if your water carries sediment or you want the extra stage protecting the main cartridge.

✓ Pros

  • Cheapest Pure Water Systems route to a filtered 3-way tap
  • Same HTO+ cartridge and life monitor

× Cons

  • No pre-filter stage
  • No fluoride reduction

Buy this if

you want filtered, better-tasting town water at a 3-way tap for the lowest setup cost.

Not for you if

your water carries sediment or you want fluoride reduced.

4. EcoHero 5-stage reverse osmosis: for fluoride, behind a 3-way tap

Pure Water Systems EcoHero 5-stage reverse osmosis system under the kitchen sink in my former Palm Beach homeUncalibrated meter69 → 3 ppmTDS, former Palm Beach home
#3 | Reverse osmosis | I have used one
Pure Water Systems EcoHero 5 Stage Reverse Osmosis (under sink)

5-stage RO | WaterMark: AS/NZS 3497 compliant (register); lead free (Pure Water Systems) | 93.6% fluoride and 98.6% lead in its certified reduction table (Pure Water Systems) | System only: add a 3-way tap or faucet

Check price and stock at Pure Water Systems →

If fluoride is the reason you want filtered water, the filter behind the tap has to be reverse osmosis. This is the system I used under my former Palm Beach kitchen sink from mid-2025. My tap water read 69 ppm TDS before and 3 ppm after, the average of three tests on a handheld meter that is not calibrated; TDS shows the membrane working, not which contaminants went. It is on the WaterMark register as AS/NZS 3497 compliant[7], and Pure Water Systems’ certified reduction table gives 93.6% for fluoride and 98.6% for lead[6]. My first service cost $490 all-in with a technician. Under-sink reverse osmosis also removed PFAS almost completely in the 2020 Duke University and NC State study[14]. Full detail in my EcoHero review.

✓ Pros

  • Reverse osmosis: fluoride, lead and dissolved solids
  • WaterMark listed
  • Pairs with the 3-way taps above

× Cons

  • Highest setup cost here
  • Sends water to drain
  • Servicing cost me $490 with a technician

Buy this if

you own your home and want fluoride reduced at a 3-way tap.

Not for you if

you only want better taste; a carbon filter costs far less.

5. PUR PLUS tap-mount filter: best for renters

PUR PLUS FM2500V tap-mount water filter for renters, vertical style in greyCertifiedNSF/ANSI 53Lead, PFAS, chlorine
#4 | Renters | No plumber
PUR PLUS Faucet Mount Filter, vertical (FM2500V)

Certified to NSF/ANSI 42, 53 and 401 (IAPMO R&T on PUR’s Oct 2025 data sheet) | Lead 99.7% (pH 6.5), total PFAS 99.92%, microplastics 99.65% (PUR data sheet) | 100 gallons (about 378 L) or 3 months | Cold water only, up to 28°C | Not for pull-out or handheld taps | Imported

Check the PUR PLUS on Amazon AU →

The strongest paperwork of any filter here, and it needs no plumber. PUR’s October 2025 performance data sheet lists IAPMO R&T certification to NSF/ANSI 42, 53 and 401, with 99.7% lead reduction at pH 6.5, 99.92% total PFAS and 99.65% microplastics, rated for 100 gallons[12]. Earlier PUR data sheets name NSF and WQA as the certifier and do not list PFAS or microplastics, so check the box of the unit you receive. PUR says to replace it after 100 gallons or 3 months, to use cold water only, and that pull-out and handheld taps are not compatible[13].

The catch for Australian kitchens: it is a US product. It ships with three adapters for external- and internal-threaded aerators, but PUR does not list thread sizes, so check that your tap has a removable aerator and compare its thread before you buy[13]. Replacement filters (RF9999) are sold on Amazon AU, around $69.00at Amazon AU · as of 19 Nov 2026, 8:29 pm AEST Details for a 4-pack. It makes no fluoride claim.

✓ Pros

  • Certified to NSF/ANSI 42, 53 and 401
  • No plumber, no drilling; goes with you when you move
  • Lead, total PFAS and microplastics in the data sheet

× Cons

  • US thread adapters; check your aerator
  • Cold water only; not for pull-out taps
  • Short filter life: 3 months

Buy this if

you rent and want certified filtered water from the tap you already have.

Not for you if

your kitchen has a pull-out or handheld mixer, or you want fluoride reduced.

6. Waterdrop X8: reverse osmosis with its own smart faucet

Waterdrop X8 tankless under-sink reverse osmosis systemPure to drain2:1Waterdrop figure
#5 | RO with dedicated faucet
Waterdrop X8 Tankless Under-Sink Reverse Osmosis (WD-X8)

800 GPD tankless RO | IAPMO R&T certified to NSF/ANSI 42, 58 and 372 (Waterdrop) | Needs a power point | Own faucet: needs a spare tap hole | Filters about $289 a year at Waterdrop AU prices

Check the Waterdrop X8 on Amazon AU →Amazon AU price: $611.29 · as of 19 Nov 2026, 11:43 pm AEST Details

If you have a spare tap hole and want reverse osmosis through Amazon, the X8 comes with its own faucet instead of feeding a 3-way tap. Waterdrop says it is certified by IAPMO R&T to NSF/ANSI 42, 58 and 372; its PFAS figures come from SGS testing Waterdrop commissioned[15]. It needs power under the sink, and Waterdrop lists no WaterMark for the system, so ask your plumber first. Waterdrop Australia sells it at $899, or 30% off with code WDX8[16], and at Waterdrop AU prices the filters run about $289 a year after the first. The X8 vs EcoHero comparison covers the trade-offs.

✓ Pros

  • Reverse osmosis with a 2:1 ratio
  • Certified to NSF/ANSI 58 (the RO standard)
  • Tankless and compact

× Cons

  • Separate faucet: second tap hole
  • No WaterMark listing found
  • Needs power under the sink

Buy this if

you have a spare tap hole, a power point under the sink and your plumber has approved the unit.

Not for you if

you want one spout for everything; pair a 3-way tap with the EcoHero instead.

Comparison table

Spec3-way tap + Twin QC3-way tap + Single QC3-way tap + EcoHero ROPUR PLUSWaterdrop X8
Spouts on the sinkOneOneOneOne (on your tap)Two
Chlorine tasteYes (maker)Yes (maker)Yes (maker)Certified (NSF/ANSI 42)Certified (NSF/ANSI 42)
ChloramineNamed (maker)Named (maker)Not statedNot statedNot stated
Lead>99.7% HTO+ (maker)HTO+ (maker)98.6% (maker’s certified table)99.7% (certified)Claimed, no figure (maker)
FluorideNo claimNo claim93.6% (maker’s certified table)No claimReduces (RO; ADA)
PlumberYesYesYesNoYes, plus power
Filter life1,500 L or 12 months (HTO+)1,500 L or 12 months (HTO+)Service; mine cost $490100 gal or 3 months6 to 24 months by stage
Free audit

Check all seven rooms, not just this one

38 checks, 29 free, ranked by impact. Sent as a 32-page PDF.

We'll email you the audit and a short series of practical guides. Unsubscribe in one click, any time. Privacy.

Sent. Taking you to your download...

What it costs to set up

SetupParts (regular price)Plus
3-way tap + Twin Quick Change HTO+$419 + $459 = $878Licensed plumber
3-way tap + Single Quick Change HTO+$419 + $379 = $798Licensed plumber
3-way tap + EcoHero 5-stage RO$419 + EcoHero (check price)Licensed plumber; drain connection
PUR PLUS tap-mount filterCurrently unavailable on Amazon AUas of 19 Nov 2026, 8:29 pm AEST DetailsFilters every 3 months

Pure Water Systems regular prices for the Goose Neck chrome tap and the HTO+ versions, checked 19 November 2026; it was running a Black Friday sale at the time. The HTO+ replacement cartridge is $179[5]. Plumber rates vary by city and job, so get a quote.

Renting? Your options

A tap-mount filter is the simplest filtered water tap a renter can usually fit without asking the landlord (check your lease): it screws on in place of the aerator and comes off when you leave. The PUR PLUS is the certified option above. If your mixer is a pull-out style, or you want fluoride reduced, skip the tap and use a countertop reverse osmosis unit instead; our water filter for renters guide compares them. Asking your landlord for permission to fit a 3-way tap at your cost is worth a try, and a licensed plumber can refit the original mixer when you go.

What we left out

Boiling and chilled filtered taps (Billi, Zip HydroTap, QETTLE) are in their own guide. Puratap, an Adelaide-based company, sells a filtered tap system with its own installation service; see our Puratap review. Uncertified tap-mount filters sold online with reduction claims but no certification listing were left out, as were 3-way taps without a published WaterMark certificate. For every filter type in one place, start with the best home water filter guide; for PFAS specifically, see the PFAS filter guide.

Final verdict

The best filtered water tap for an Australian home you own is a WaterMark-certified 3-way mixer tap with the right filter behind it: the Pure Water Systems Goose Neck 3 Way Mixer Tap with the Twin Quick Change HTO+ for chlorine, chloramine and lead, or with the EcoHero reverse osmosis system if you want fluoride out. Renters should look at the certified PUR PLUS. I am a former Navy clearance diver, not a plumber, so get a licensed plumber’s quote before you buy anything that connects to your pipes. For the full under-sink line-up, see the best under-sink water filters.

Frequently asked questions

What is the best filtered water tap in Australia?

For a home you own, a WaterMark-certified 3-way mixer tap fed by an under-sink filter: it replaces your kitchen mixer, so you get hot, cold and filtered water from one spout. My pick is the Pure Water Systems Goose Neck 3 Way Mixer Tap with its Twin Quick Change filter. Renters should look at a certified tap-mount filter such as the PUR PLUS.

What is a 3-way tap?

A kitchen mixer with a third waterway for filtered water. One lever runs normal hot and cold; a second lever runs filtered water from a filter under the sink through a separate channel, so the two never mix.

Does a 3-way tap filter the water itself?

No. The tap only delivers the water. The filtering is done by the under-sink filter or reverse osmosis system connected to it, so the filter you pair it with decides what is removed.

Do I need a plumber to install a 3-way tap?

Yes. Tapware and water filters are on the WaterMark Schedule, so they must be WaterMark certified, and state plumbing regulators require a licensed plumber to connect them. Pure Water Systems also says a licensed plumber is needed to keep the Quick Change parts warranty.

What filtered water tap can a renter use?

A tap-mount filter that screws on in place of the aerator, with no plumbing. The PUR PLUS is certified to NSF/ANSI 42, 53 and 401. It is for cold water only and does not fit pull-out or handheld taps.

Does a filtered water tap remove fluoride?

Only if the filter behind it does. The American Dental Association says most carbon filters do not remove fluoride, while almost all reverse osmosis systems remove most of it. For fluoride, pair a 3-way tap with a reverse osmosis system.

Can I use a 3-way tap with reverse osmosis?

Yes. Pure Water Systems describes its Goose Neck 3 Way Mixer Tap as an upgrade from the faucet supplied with under-sink and reverse osmosis systems. Ask your plumber to confirm the connections for your model.

How often do I change the filter behind a filtered water tap?

Pure Water Systems rates the HTO+ cartridge for up to 1,500 litres or 12 months, whichever comes first, and its Quick Change systems have a cartridge life monitor. The PUR PLUS tap filter lasts up to 100 gallons (about 378 litres) or 3 months.

Jayce Love, former Royal Australian Navy Clearance Diver and Clean and Native founder
Written by Jayce Love

Former Royal Australian Navy Clearance Diver and TAG-E counter-terrorism operator. Founded Clean and Native to apply the same rigorous thinking to the home environment.

Full biography →
Free · 32-page PDF

The 7-Room Home Audit

Your tap water is one room. The audit covers all seven: 38 checks across water, air and EMF, 29 of them free, ranked by impact against Australian guidelines.

  • Morning tap flush: the free lead fix most homes skip
  • How to read your utility's water quality report
  • Renting or owning: the two reverse osmosis filters I use at home

We'll email you the audit and a short series of practical guides. Unsubscribe in one click, any time. Privacy.

Sent. Taking you to your download...

Similar Posts